Free DISA STIG and SRG Library | Vaulted

McAfee VirusScan 8.8 Managed Client STIG

Version 5 Release 20
2019-04-26
U_McAfee_VirusScan88_Managed_Client_STIG_V5R20_Manual-xccdf.xml
The McAfee VirusScan Managed Client STIG is published as a tool to improve the security of Department of Defense (DoD) information systems. The requirements are derived from the NIST 800-53 and related documents. Comments or proposed revisions to this document should be sent via e-mail to the following address: disa.stig_spt@mail.mil.

Vulnerabilities (87)

McAfee VirusScan On-Access General Policies must be configured to enable on-access scanning at system startup.

Finding ID
DTAM001
Rule ID
SV-55134r1_rule
Severity
Cat I
CCE
(None)
Group Title
DTAM001-McAfee VirusScan Control Panel
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

For antivirus software to be effective, it must be running at all times, beginning from the point of the system's initial startup. Otherwise, the risk is greater for viruses, trojans, and other malware infecting the system during that startup phase.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the General tab, locate the "Enable on-access scanning:" label. Select the "Enable on-access scanning at system startup" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the General tab, locate the "Enable on-access scanning:" label. Ensure the "Enable on-access scanning at system startup" option is selected. Criteria: If the "Enable on-access scanning at startup" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value of bStartDisabled is 0, this is not a finding. If the value is 1, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to scan boot sectors.

Finding ID
DTAM002
Rule ID
SV-55135r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM002-McAfee VirusScan on access scan boot sectors
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Boot sector viruses will install into the boot sector of a system, ensuring that they will execute when the user boots the system. This risk is mitigated by scanning boot sectors at each startup of the system.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the General tab, locate the "Scan:" label. Select the "Boot Sectors" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the General tab, locate the "Scan:" label. Ensure the "Boot Sectors" option is selected. Criteria: If the "Boot Sectors" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value of bDontScanBootSectors is 0, this is not a finding. If the value is 1, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to scan floppy during shutdown.

Finding ID
DTAM003
Rule ID
SV-55139r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM003-McAfee VirusScan on access scan floppy
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Computer viruses in the early days of personal computing were almost exclusively passed around by floppy disks. Floppy disks would be used to boot the computer and, if infected, would infect the hard drive files as well. Although floppy drives have fallen out of use, it is still a good security practice, whenever the antivirus software allows, to enable the scanning software to scan a floppy disk at shutdown.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the General tab, locate the "Scan:" label. Select the "Floppy during shutdown" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the General tab, locate the "Scan:" label. Ensure the "Floppy during shutdown" option is selected. Criteria: If the "Floppy during shutdown" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value of bScanFloppyonShutdown is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to notify local users when detections occur.

Finding ID
DTAM004
Rule ID
SV-55141r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM004-McAfee VirusScan message dialog
CCI
CCI-001662
Target Key
(None)
Documentable
No
Discussion

"An effective awareness program explains proper rules of behavior for use of an organization's IT systems and information. Accordingly, awareness programs should include guidance to users on malware incident prevention, which can help reduce the frequency and severity of malware incidents. Organizations should also make users aware of policies and procedures that apply to malware incident handling, such as how to identify if a host may be infected, how to report a suspected incident, and what users need to do to assist with incident handling. Ensuring the antivirus software alerts the users when malware is detected will ensure the user is informed of the incident and be able to more closely relate the incident to actions being performed by the user at the time of the detection."

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Messages tab, locate the "User message:" label. Select the "Show the messages dialog box when a threat is detected and display the specified text in the message" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Messages tab, locate the "User message:" label. Ensure the "Show the messages dialog box when a threat is detected and display the specified text in the message" option is selected. Criteria: If the "Show the messages dialog box when a threat is detected and display the specified text in the message" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value of Alert_AutoShowList is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to prevent users from removing messages from the list.

Finding ID
DTAM005
Rule ID
SV-55144r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM005-McAfee VirusScan remove messages
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Good incident response analysis includes reviewing all logs and alerts on the system reporting the infection. If users were permitted to remove alerts from the display, incident response forensic analysis would be inhibited.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Messages tab, locate the "Actions available to user:" label. Uncheck the "Remove messages from the list" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Messages tab, locate the "Actions available to user:" label. Ensure the "Remove messages from the list" option is NOT selected. Criteria: If the "Remove messages from the list" option is NOT selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value of Alert_UsersCanRemove is 0, this is not a finding. If the value is 1, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to log the scan sessions.

Finding ID
DTAM009
Rule ID
SV-55145r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM009-McAfee VirusScan Control Panel log
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Log management is essential to ensuring that computer security records are stored in sufficient detail for an appropriate period of time. Routine log analysis is beneficial for identifying security incidents, policy violations, fraudulent activity, and operational problems. Logs are also useful when performing auditing and forensic analysis, supporting internal investigations, establishing baselines, and identifying operational trends and long-term problems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Reports tab, locate the "Log to file:" label. Select the "Enable activity logging and accept the default location for the log file or specify a new location" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Reports tab, locate the "Log to file:" label. Ensure the "Enable activity logging and accept the default location for the log file or specify a new location" option is selected. Criteria: If the "Enable activity logging and accept the default location for the log file or specify a new location" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value of bLogtoFile is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies log file size must be restricted and be configured to at least 10MB.

Finding ID
DTAM010
Rule ID
SV-55147r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM010-McAfee VirusScan limit log size parameter
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

While logging is imperative to forensic analysis, logs could grow to the point of impacting disk space on the system. In order to avoid the risk of logs growing to the size of impacting the operating system, the log size will be restricted, but must also be large enough to retain forensic value.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Reports tab, locate the "Log file size:" label. Select the "Limit the size of log file" option. For the "Maximum log file size:", input a value of at least 10MB or more. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Reports tab, locate the "Log file size:" label. Ensure the "Limit the size of log file" option is selected. Ensure the "Maximum log file size" is at least 10MB. Criteria: If the "Limit the size of log file" option is selected and the "Maximum log file size:" is at least 10MB, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value of bLimitSize is 1 and dwMaxLogSizeMB is configured to Decimal (10) or higher, this is not a finding. If bLimitSize is 0, this is a finding. If dwMaxLogSizeMB is less than Decimal (10), this is a finding.

Responsibility

System Administrator

IA Controls

ECSC-1

McAfee VirusScan On-Access General Policies must be configured to log the session summary.

Finding ID
DTAM012
Rule ID
SV-55148r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM012-McAfee VirusScan log summary parameter
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Log management is essential to ensuring that computer security records are stored in sufficient detail for an appropriate period of time. Routine log analysis is beneficial for identifying security incidents, policy violations, fraudulent activity, and operational problems. Logs are also useful when performing auditing and forensic analysis, supporting internal investigations, establishing baselines, and identifying operational trends and long-term problems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Reports tab, locate the "What to log in addition to scanning activity:" label. Select the "Session summary" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Reports tab, locate the "What to log in addition to scanning activity:" label. Ensure the "Session summary" option is selected. Criteria: If the "Session summary" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value of bLogSummary is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to log any failure to scan encrypted files.

Finding ID
DTAM013
Rule ID
SV-55149r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM013-McAfee VirusScan log encrypted files parameter
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

While logging is imperative to forensic analysis, logs could grow to the point of impacting disk space on the system. In order to avoid the risk of logs growing to the size of impacting the operating system, the log size will be restricted. If the data in the log file exceeds the file size set, the oldest 20 percent of the entries are deleted and new data is appended to the file, so although the file size is restricted, it must also be large enough to retain forensic value.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Reports tab, locate the "What to log in addition to scanning activity:" label. Select the "Failure to scan encrypted files" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Reports tab, locate the "What to log in addition to scanning activity:" label. Ensure the "Failure to scan encrypted files" option is selected. Criteria: If the "Failure to scan encrypted files" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value ReportEncryptedFiles is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan must be configured to receive DAT and Engine updates.

Finding ID
DTAM016
Rule ID
SV-55151r4_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM016-McAfee VirusScan autoupdate parameters
CCI
CCI-001247
Target Key
(None)
Documentable
No
Discussion

Antivirus signature files are updated almost daily by antivirus software vendors. These files are made available to antivirus clients as they are published. Keeping virus signature files as current as possible is vital to the security of any system. The antivirus software product must be configured to receive those updates automatically in order to afford the expected protection.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset for the task assignment, select Actions, select Agent, and Select Modify Tasks on a Single System. Select Actions, and select New Client Task Assignment. In the Task to Schedule: area, select McAfee Agent for the product. Select Product Update for the Task Type. Select Create New Task. Provide a descriptive name for the task. Locate the "Package Types:" label. Select the "Engine" and "DAT" options. Select Save. On the Schedule page, locate the "Schedule Status:" label, and select the "Enabled" option. Locate the "Schedule type:" label, and from the pull down menu, select at least "Daily". Select Next. On the Summary page, verify the settings and select Save. Update the client machine.

Check Content

Note: Automatic updates to antivirus signature definitions are to be performed once every 24 hours for hosts connected to the network. From the ePO server console System Tree, select the "Systems" tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. Verify there is a Product Update task type enabled. Select the Task Name, locate the "Package Types:" label. Ensure Engine and DAT are selected. Criteria: If a Product update is Enabled with Engine and DAT selected, and scheduled for at least a daily update, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line in the [General] section of the file is provided to describe the task type. In this case, TaskType=update is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Settings] Enabled=1 and [Schedule] Type=0, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Delivery Email Scan Policies must be configured to enable on-delivery email scanning.

Finding ID
DTAM021
Rule ID
SV-55153r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM021-McAfee VirusScan Exchange scanner
CCI
CCI-001170
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Scanning of email:" label. Select the "Enable on-delivery email scanning" option. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Delivery Email Scan Policies. Under the Scan Items tab, locate the "Scanning of email:" label. Ensure the "Enable on-delivery email scanning" option is selected. Criteria: If the "Enable on-delivery email scanning" is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\GeneralOptions Criteria: If the value bEnabled is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Delivery Email Scan Policies must be configured to find unknown program threats and Trojans.

Finding ID
DTAM022
Rule ID
SV-55169r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM022-McAfee VirusScan find unknown programs
CCI
CCI-001662
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Heuristics:" label. Select the "Find unknown program threats and trojans" option. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Heuristics:" label. Ensure the "Find unknown program threats and trojans" option is selected. Criteria: If the "Find unknown program threats and trojans" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\DetectionOptions Criteria: If the value dwProgramHeuristicsLevel is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On Delivery Email Scan Policies must be configured to find unknown macro threats.

Finding ID
DTAM023
Rule ID
SV-55171r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM023- McAfee VirusScan find unknown macro virus
CCI
CCI-001662
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Heuristics:" label. Select the "Find unknown macro threats" option. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Heuristics:" label. Ensure the "Find unknown macro threats" option is selected. Criteria: If the "Find unknown macro threats" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email scanner\Outlook\OnDelivery\DetectionOptions Criteria: If the value dwMacroHeuristicsLevel is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On Delivery Email Scan Policies must be configured to decode MIME encoded files.

Finding ID
DTAM027
Rule ID
SV-55174r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM027-McAfee VirusScan decode MIME email
CCI
CCI-001170
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Locate in the Category column the On Delivery Email Scan Policies. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Compressed files:" label. Select the "Decode MIME encoded files" option. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Locate in the Category column the On Delivery Email Scan Policies. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Compressed files:" label. Ensure the "Decode MIME encoded files" option is selected. Criteria: If the "Decode MIME encoded files" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\DetectionOptions Criteria: If the value ScanMime is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On Delivery Email Scan Policies must be configured to scan email message body.

Finding ID
DTAM028
Rule ID
SV-55177r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM028-McAfee VirusScan scan e-mail message body
CCI
CCI-001170
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Email message body (for Microsoft Outlook only):" label. Select the "Scan email message body" option. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Email message body (for Microsoft Outlook only):" label. Ensure the "Scan email message body" option is selected. Criteria: If the option "Scan email message body" is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\DetectionOptions Criteria: If the value ScanMessageBodies is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On Delivery Email Scan Policies, when a threat is found, must be configured to clean attachments as the first action.

Finding ID
DTAM029
Rule ID
SV-55178r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM029-McAfee VirusScan allowed actions email
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Actions tab, locate the "When a threat is found:" label. For the "Perform this action first:" pull down menu, select "Clean attachments". Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Delivery Email Scan Policies. Under the Actions tab, locate the "When a threat is found:" label. Ensure that for the "Perform this action first:" pull down menu, "Clean attachments" is selected. Criteria: If "Clean attachments" is selected for "Perform this action first", this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\ActionOptions Criteria: If the value for uAction is not 5, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Delivery Email Scan Policies must be configured to record scanning activity in a log file.

Finding ID
DTAM035
Rule ID
SV-55187r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM035-McAfee VirusScan log to file email
CCI
CCI-000130
Target Key
(None)
Documentable
No
Discussion

Log management is essential to ensuring that computer security records are stored in sufficient detail for an appropriate period of time. Routine log analysis is beneficial for identifying security incidents, policy violations, fraudulent activity, and operational problems. Logs are also useful when performing auditing and forensic analysis, supporting internal investigations, establishing baselines, and identifying operational trends and long-term problems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Delivery Email Scan Policies. Under the Reports tab, locate the "Log to file:" label. Select the "Enable activity logging and accept the default location for the log file or specify a new location" option. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Delivery Email Scan Policies. Under the Reports tab, locate the "Log to file:" label. Ensure that "Enable activity logging and accept the default location for the log file or specify a new location" is selected. Criteria: If the option "Enable activity logging and accept the default location for the log file or specify a new location" is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\ReportOptions Criteria: If the value bLogToFile is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Delivery Email Scan Policies log file size must be restricted and be configured to be at least 10MB.

Finding ID
DTAM036
Rule ID
SV-55188r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM036-McAfee VirusScan limit log size email
CCI
CCI-000140
Target Key
(None)
Documentable
No
Discussion

While logging is imperative to forensic analysis, logs could grow to the point of impacting disk space on the system. In order to avoid the risk of logs growing to the size of impacting the operating system, the log size will be restricted, but must also be large enough to retain forensic value.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Delivery Email Scan Policies. Under the Reports tab, locate the "Log file size:" label. Select the "Limit the size of log file" option. For the "Maximum log file size:", select a value of 10MB or more. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Delivery Email Scan Policies. Under the Reports tab, locate the "Log file size" label. Criteria: If the "Limit the size of log file" is checked and the "Maximum log file size:" is at least 10MB, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\ReportOptions Criteria: If both the value of bLimitSize is 1 and the value of dwMaxLogSizeMB is at least decimal (10), this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to scan all fixed, or local, disks and running processes.

Finding ID
DTAM045
Rule ID
SV-55191r4_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM045-McAfee VirusScan fixed disk and processes
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Antivirus software is the mostly commonly used technical control for malware threat mitigation. Antivirus software on hosts should be configured to scan all hard drives regularly to identify any file system infections and to scan any removable media, if applicable, before media is inserted into the system. Not scheduling a regular scan of the hard drives of a system and/or not configuring the scan to scan all files and running processes introduces a higher risk of threats going undetected.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Locations tab, locate the "Locations to scan:" label. In the drop-down menus, select "All fixed drives" or "All local drives" and "Running processes". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Locations tab, locate the "Locations to scan:" label. Ensure the "All fixed drives" or "All local drives" and "Running processes" options are displayed. Criteria: If "All fixed drives" or "All local drives" and "Running processes" are displayed in the configuration for the daily or weekly On Demand Scan, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [ScanItems] szScanItemX=All fixed drives or szScanItemX=All local drives, and [ScanItems] scScanItemX=SpecialMemory are present, this is not a finding. For the values of szScanItemX, the character X represents some integer =>0. Example: szScanItem0=All fixed disks, szScanItem1=SpecialMemory.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to scan all subfolders.

Finding ID
DTAM046
Rule ID
SV-55192r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM046-McAfee VirusScan include subfolders
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Antivirus software is the mostly commonly used technical control for malware threat mitigation. Antivirus software on hosts should be configured to scan all hard drives and folders regularly to identify any file system infections and to scan any removable media, if applicable, before media is inserted into the system. Not scheduling a regular scan of the hard drives of a system and/or not configuring the scan to scan all files and running processes introduces a higher risk of threats going undetected.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Locations tab, locate the "Scan options:" label. Select the "Include subfolders" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Locations tab, locate the "Scan options:" label. Ensure the "Include subfolders" option is selected. Criteria: If "Include subfolders" is selected, this is not a finding. On the client machine, use the Windows Explorer to navigate to the following folder: Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Where] bScanSubDirs=1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to scan boot sectors.

Finding ID
DTAM047
Rule ID
SV-55193r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM047-McAfee VirusScan include boot sectors
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Boot sector viruses will install into the boot sector of a system, ensuring that they will execute when the user boots the system. This risk is mitigated by scanning boot sectors at each startup of the system.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Locations tab, locate the "Scan options:" label. Select the "Scan boot sectors" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Locations tab, locate the "Scan options:" label. Ensure the "Scan boot sectors" option is selected. Criteria: If "Scan boot sectors" is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Where] bSkipBootScan=0, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to scan all files.

Finding ID
DTAM048
Rule ID
SV-55194r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM048-McAfee VirusScan scan all files parameter
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

When scanning for malware, excluding specific file types will increase the risk of a malware-infected file going undetected. By configuring antivirus software to scan all file types, the scanner has a higher success rate at detecting and eradicating malware.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Items tab, locate the "File types to scan:" label. Select the "All files" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Items tab, locate the "File types to scan:" label. Ensure the "All files" option is selected. Criteria: If "All files" is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [What] bScanAllFiles=1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured so there are no exclusions from the scan unless exclusions have been documented with, and approved by, the ISSO/ISSM/DAA.

Finding ID
DTAM050
Rule ID
SV-55195r4_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM050-McAfee VirusScan exclusions parameter
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

When scanning for malware, excluding specific files will increase the risk of a malware-infected file going undetected. By configuring antivirus software without any exclusions, the scanner has a higher success rate at detecting and eradicating malware.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Exclusions tab, locate the "What not to scan:" label. Ensure that no items are listed in this area.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Exclusions tab, locate the "What not to scan:" label. Ensure that no items are listed in this area. Criteria: If no items are listed in the "What not to scan:" area, this is not a finding. If excluded items exist, and they are documented with and approved by the ISSO/ISSM/DAA, this is not a finding. If excluded items exist, and they are not documented with and approved by the ISSO/ISSM/DAA, this is a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Exclusions] dwExclusionCount=0, this is not a finding. Criteria: If dwExclusionCount is not set to 0, ensure the justification for exclusions found have been documented with the ISSO/ISSM/DAA. If exclusions are documented with the ISSO/ISSM/DAA, this is not a finding. If exclusions have not been documented, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to scan inside archives.

Finding ID
DTAM052
Rule ID
SV-55196r4_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM052-McAfee VirusScan scan archives parameter
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Malware is often packaged within an archive. In addition, archives might have other archives within. Not scanning archive files introduces the risk of infected files being introduced into the environment.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Items tab, locate the "Options:" label. Select the "Scan inside archives (e.g. .ZIP)" option. Select Save.

Check Content

NOTE: This setting must be configured. Exclusions for specific extensions may be created. Exclusions must be documented with, and approved by, the local ISSO/ISSM. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Items tab, locate the "Options:" label. Ensure the "Scan inside archives (e.g. .ZIP)" option is selected. Criteria: If "Scan inside archives (e.g. .ZIP)" is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [What] ScanArchives=1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to decode MIME encoded files.

Finding ID
DTAM053
Rule ID
SV-55197r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM053-McAfee VirusScan decode MIME encoded
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Multipurpose Internet Mail Extensions (MIME) encoded files can be crafted to hide a malicious payload. When the MIME encoded file is presented to software that decodes the MIME encoded files, such as an email client, the malware is released. Scanning these files as part of the regularly scheduled scan tasks will mitigate this risk.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Items tab, locate the "Options:" label. Select the "Decode MIME encoded files" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Items tab, locate the "Options:" label. Ensure the "Decode MIME encoded files" option is selected. Criteria: If "Decode MIME encoded files" is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [What] ScanMIME=1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to find unknown program threats.

Finding ID
DTAM054
Rule ID
SV-55199r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM054 - McAfee VirusScan find unknown programs
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Due to the ability of malware to mutate after infection, standard antivirus signatures may not be able to catch new strains or variants of the malware. Typically, these strains and variants will share unique characteristics with others in their virus family. By using a generic signature to detect the shared characteristics, using wildcards where differences lie, the generic signature can detect viruses even if they are padded with extra, meaningless code. This method of detection is Heuristic detection.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Items tab, locate the "Heuristics:" label. Select the "Find unknown program threats" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Items tab, locate the "Heuristics:" label. Ensure the "Find unknown program threats" option is selected. Criteria: If "Find unknown program threats" is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Advanced] dwProgramHeuristicsLevel=1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to find unknown macro threats.

Finding ID
DTAM055
Rule ID
SV-55201r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM055-McAfee VirusScan find unknown macro virus
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Interpreted viruses are executed by an application. Within this subcategory, macro viruses take advantage of the capabilities of applications' macro programming language to infect application documents and document templates, while scripting viruses infect scripts that are understood by scripting languages processed by services on the OS. Many attackers use toolkits containing several different types of utilities and script that can be used to probe and attack hosts. Scanning for unknown macro viruses will mitigate zero day attacks.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Items tab, locate the "Heuristics:" label. Select the "Find unknown macro threats" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Items tab, locate the "Heuristics:" label. Ensure the "Find unknown macro threats" option is selected. Criteria: If "Find unknown macro threats" is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Advanced] dwMacroHeuristicsLevel=1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan actions, When a threat is found must be configured to clean files automatically as first action.

Finding ID
DTAM056
Rule ID
SV-55203r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM056-McAfee VirusScan action for Virus
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Malware may have infected a file that is necessary to the user. By configuring the antivirus software to first attempt cleaning the infected file, availability to the file is not sacrificed. If a cleaning attempt is not successful, however, deleting the file is the only safe option so as to ensure the malware is not introduced onto the system or network.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Actions tab, locate the "When a threat is found:" label. From the "Perform this action first:" pull down menu, select "Clean files". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Actions tab, locate the "When a threat is found:" label. Ensure that from the "Perform this action first:" pull down menu, "Clean files" is selected. Criteria: If "Clean files" is selected for "Perform this action first", this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Action] uAction is not set to 5, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan actions, When a threat is found must be configured to delete files automatically if first action fails.

Finding ID
DTAM057
Rule ID
SV-55204r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM057-McAfee VirusScan secondary action
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Malware may have infected a file that is necessary to the user. By configuring the antivirus software to first attempt cleaning the infected file, availability to the file is not sacrificed. If a cleaning attempt is not successful, however, deleting the file is the only safe option so as to ensure the malware is not introduced onto the system or network.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Actions tab, locate the "When a threat is found:" label. From the "If the first action fails, then perform this action:" pull down menu, select "Delete files". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Actions tab, locate the "When a threat is found:" label. Ensure that from the "If the first action fails, then perform this action:" pull down menu, "Delete files" is selected. Criteria: If "Delete files" is selected for "If the first action fails, then perform this action:", this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Action] uSecAction is not set to 4, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to record scanning activity in a log file.

Finding ID
DTAM059
Rule ID
SV-55209r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM059-McAfee VirusScan log to file parameter
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Log management is essential to ensuring that computer security records are stored in sufficient detail for an appropriate period of time. Routine log analysis is beneficial for identifying security incidents, policy violations, fraudulent activity, and operational problems. Logs are also useful when performing auditing and forensic analysis, supporting internal investigations, establishing baselines, and identifying operational trends and long-term problems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Reports tab, locate the "Log to file:" label. Select the "Enable activity logging and accept the default location for the log file or specify a new location" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Reports tab, locate the "Log to file:" label. Ensure the "Enable activity logging and accept the default location for the log file or specify a new location" option is selected. Criteria: If "Enable activity logging and accept the default location for the log file or specify a new location" is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Reports] bLogToFile=1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan log file size must be restricted and be configured to at least 10MB.

Finding ID
DTAM060
Rule ID
SV-55211r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM060-McAfee VirusScan log file limit parameter
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

While logging is imperative to forensic analysis, logs could grow to the point of impacting disk space on the system. In order to avoid the risk of logs growing to the size of impacting the operating system, the log size will be restricted, but must also be large enough to retain forensic value.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Reports tab, locate the "Log file size:" label. Select the "Limit the size of log file" option. For the "Maximum log file size:", select a value of 10MB or more. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". Locate the "Task to Schedule:" label. Verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Reports tab, locate the "Log file size:" label. Criteria: If the "Limit the size of log file" option is selected and the "Maximum log file size:" is at least 10MB, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If the value of bLimitSize value is not 1, this is a finding. If the uKilobytes is less than 10240 (Decimal), this is a finding. If the bLimitSize value is 1 and the uKilobytes value is 10240 (Decimal) or more, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to log any failure to scan encrypted files.

Finding ID
DTAM063
Rule ID
SV-55212r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM063-McAfee VirusScan failure on encrypted file
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Log management is essential to ensuring that computer security records are stored in sufficient detail for an appropriate period of time. Routine log analysis is beneficial for identifying security incidents, policy violations, fraudulent activity, and operational problems. Logs are also useful when performing auditing and forensic analysis, supporting internal investigations, establishing baselines, and identifying operational trends and long-term problems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Reports tab, locate the "What to log in addition to scanning activity:" label. Select the "Failure to scan encrypted files" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". Locate the "Task to Schedule:" label. Verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Reports tab, locate the "What to log in addition to scanning activity:" label. Ensure the "Failure to scan encrypted files" option is selected. Criteria: If the "Failure to scan encrypted files" option is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Reports] bLogScanFailure=1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be scheduled to be executed at least on a weekly basis.

Finding ID
DTAM070
Rule ID
SV-55213r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM070-McAfee VirusScan schedule
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Antivirus software is the mostly commonly used technical control for malware threat mitigation. Antivirus software on hosts should be configured to scan all hard drives regularly to identify any file system infections and to scan any removable media, if applicable, before media is inserted into the system. Not scheduling a regular scan of the hard drives of a system and/or not configuring the scan to scan all files and running processes introduces a higher risk of threats going undetected.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". Select "Edit Assignment" in the Actions column. In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". Select the schedule page. Locate the "Schedule type:" label. For the pull down menu, select "Weekly". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". Select "Edit Assignment" in the Actions column. In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". Select the Summary tab. Locate the "Schedule:" label. Ensure the Status is "Enabled" and that the Type is at least "Weekly". Criteria: If the Scheduled Status: is "Enabled" and the Schedule Type: is at least "Weekly", this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Settings] Enabled=1 and [Schedule] Type=0 the schedule is daily, this is not a finding. If [Settings] Enabled=1 and [Schedule] Type=1 the schedule is weekly, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to enable scanning of scripts.

Finding ID
DTAM090
Rule ID
SV-55214r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM090-McAfee VirusScan on-access script scan parameter
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Interpreted viruses are executed by an application. Within this subcategory, macro viruses take advantage of the capabilities of applications' macro programming language to infect application documents and document templates, while scripting viruses infect scripts that are understood by scripting languages processed by services on the OS. Many attackers use toolkits containing several different types of utilities and scripts that can be used to probe and attack hosts. (NIST SP 800-83) The scanning of scripts is crucial in preventing these attacks.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the ScriptScan tab, locate the "ScriptScan:" label. Select the "Enable scanning of scripts" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the ScriptScan tab, locate the "ScriptScan:" label. Ensure the "Enable scanning of scripts" option is selected. Criteria: If the "Enable scanning of scripts" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Script Scanner Criteria: If the value of ScriptScanEnabled is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to block the connection when a threatened file is detected in a shared folder.

Finding ID
DTAM091
Rule ID
SV-55217r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM091-McAfee VirusScan on-access scan blocking
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Containment during a virus outbreak is crucial. Infected hosts may attempt to spread malware and will use every network path available to them when spreading that infection. By containing the system when a detection is found, the malware will be restricted to that one system. Likewise, if malware is detected in a shared folder, maintaining the connection between a system and the shared folder would allow the malware to spread. Placing temporary restrictions on network connectivity is an effective mitigation mechanism. These block connection settings will most often be used on a server housing shared folders and files, and will block the connection from any network user on a remote computer who attempts to read from, or write to, a threatened file in the shared folder. In addition, it will block the connection from any user on a remote computer who attempts to write an unwanted program to the computer. The connection will be unblocked after the specified amount of time, re-allowing access to the other shared files and folders, but will be re-blocked should those same file accesses be attempted.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Blocking tab, locate the "Block the connection:" label. Select the "Block the connection when a threatened file is detected in a shared folder" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Blocking tab, locate the "Block the connection:" label. Ensure the "Block the connection when a threatened file is detected in a shared folder" option is selected. Criteria: If the "Block the connection when a threatened file is detected in a shared folder" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value of VSIDBlock is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to unblock connections after a minimum of 30 minutes.

Finding ID
DTAM092
Rule ID
SV-55219r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM092-McAfee VirusScan on-access scan blocking
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Containment during a virus outbreak is crucial. Infected hosts may attempt to spread malware and will use every network path available to them when spreading that infection. By containing the system when a detection is found, the malware will be restricted to that one system. Likewise, if malware is detected in a shared folder, maintaining the connection between a system and the shared folder would allow the malware to spread. Placing temporary restrictions on network connectivity is an effective mitigation mechanism. These block connection settings will most often be used on a server housing shared folders and files, and will block the connection from any network user on a remote computer who attempts to read from, or write to, a threatened file in the shared folder. In addition, it will block the connection from any user on a remote computer who attempts to write an unwanted program to the computer. The connection will be unblocked after the specified amount of time, re-allowing access to the other shared files and folders, but will be re-blocked should those same file accesses be attempted.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Blocking tab, locate the "Block the connection:" label. Enter a value in "Unblock connections after x minutes" where x is set to no less than 30 minutes. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Blocking tab, locate the "Block the connection:" label. Ensure the "Unblock connections after x minutes" option has x set to no less than 30 minutes. Criteria: If the "Unblock connections after x minute(s)" option is configured to no less than 30 minutes, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value of VSIDBlockTimeout >= to HEX 1E, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies must be configured to block the connection when a file with a potentially unwanted program is detected in a shared folder.

Finding ID
DTAM093
Rule ID
SV-55221r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM093-McAfee VirusScan on-access scan blocking
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Containment during a virus outbreak is crucial. Infected hosts may attempt to spread malware and will use every network path available to them when spreading that infection. By containing the system when a detection is found, the malware will be restricted to that one system. Likewise, if malware is detected in a shared folder, maintaining the connection between a system and the shared folder would allow the malware to spread. Placing temporary restrictions on network connectivity is an effective mitigation mechanism. These block connection settings will most often be used on a server housing shared folders and files and will block the connection from any network user on a remote computer who attempts to read from, or write to, a threatened file in the shared folder. In addition, it will block the connection from any user on a remote computer who attempts to write an unwanted program to the computer. The connection will be unblocked after the specified amount of time, re-allowing access to the other shared files and folders but will be re-blocked should those same file accesses be attempted.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Blocking tab, locate the "Block" label. Select the "Block the connection when a file with a potentially unwanted program is detected in a shared folder" option. Select OK to Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the Blocking tab, locate the "Block" label. Ensure the "Block the connection when a file with a potentially unwanted program is detected in a shared folder" option is checked. Criteria: If the "Block the connection when a file with a potentially unwanted program is detected in a shared folder" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value of VSIDBlockOnNonVirus is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies must be configured to use only one scanning policy for all processes, unless the use of Low-Risk Processes/High-Risk Processes has been documented with, and approved by, the IAO/IAM.

Finding ID
DTAM100
Rule ID
SV-55222r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM100-McAfee VirusScan scan default values
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Organizations should use centrally managed antivirus software that is controlled and monitored regularly by antivirus administrators, who are also typically responsible for acquiring, testing, approving, and delivering antivirus signature and software updates through the organizations. Some processes are known to be higher risk while others are low risk. By restricting policy configuration to the Default Processes policy, all processes will be interpreted equally when applying the policy settings, and will provide the highest level of protection. Best practice dictates configuring Low-Risk and/or High-Risk policies only when it is necessary to improve system performance and will focus the scanning where it is most likely to detect malware. There is risk associated with configuring the Low-Risk and/or High-Risk policies for the purpose of specifically excluding processes from scanning, and should only be done after evaluating other policy settings and determining risk.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Processes tab, locate the "Process Settings:" label. Select the "Configure one scanning policy for all processes" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Processes tab, locate the "Process Settings:" label. Ensure the "Configure one scanning policy for all processes" option is selected. Criteria: If the "Configure one scanning policy for all processes" option is selected, this is not a finding. If the "Configure one scanning policy for all processes" option is not selected, and the use of Low-Risk Processes/High-Risk processes has been documented with, and approved by, the IAO/IAM, this is not a finding. If the "Configure one scanning policy for all processes" option is not selected, and the use of Low-Risk Processes/High-Risk Processes has not been documented/approved by the IAO/IAM, this is a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration Criteria: If the value OnlyUseDefaultConfig is 1, this is not a finding. If the value is 0 and the use of Low-Risk Processes/High-Risk Processes has not been documented and approved by the IAO/IAM, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies must be configured to scan when writing to disk.

Finding ID
DTAM101
Rule ID
SV-55224r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM101-McAfee VirusScan scan when writing disk
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Antivirus software is the most commonly used technical control for malware threat mitigation. Real-time scanning of files as they are written to disk is a crucial first line of defense from malware attacks.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Scan files:" label. Select the "When writing to disk" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Scan files:" label. Ensure the "When writing to disk" option is selected. Criteria: If the "When writing to disk" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value bScanIncoming is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies must be configured to scan when reading from disk.

Finding ID
DTAM102
Rule ID
SV-55225r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM102-McAfee VirusScan scan when reading
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Antivirus software is the most commonly used technical control for malware threat mitigation. Real-time scanning of files as they are read from disk is a crucial first line of defense from malware attacks.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Scan files:" label. Select the "When reading from disk" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Scan files:" label. Ensure the "When reading from disk" option is selected. Criteria: If the "When reading from disk" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value bScanOutgoing is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies must be configured to scan all files.

Finding ID
DTAM103
Rule ID
SV-55228r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM103-McAfee VirusScan scan all files parameter
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

When scanning for malware, excluding specific file types will increase the risk of a malware-infected file going undetected. By configuring antivirus software to scan all file types, the scanner has a higher success rate at detecting and eradicating malware.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "File Types to Scan:" label. Select the "All Files" radio button option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "File Types to Scan:" label. Ensure the "All Files" radio button is selected. Criteria: If the "All Files" radio button is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value LocalExtensionMode is 1 and the value of NetworkExtensionMode is 1, this is not a finding. If either of these is not 1, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies must be configured to find unknown unwanted programs and trojans.

Finding ID
DTAM104
Rule ID
SV-55230r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM104-McAfee VirusScan heuristics program
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Due to the ability of malware to mutate after infection, standard antivirus signatures may not be able to catch new strains or variants of the malware. Typically, these strains and variants will share unique characteristics with others in their virus family. By using a generic signature to detect the shared characteristics, using wildcards where differences lie, the generic signature can detect viruses even if they are padded with extra, meaningless code. This method of detection is Heuristic detection.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Heuristics:" label. Select the "Find unknown unwanted programs and trojans" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Heuristics:" label. Ensure the "Find unknown unwanted program threats and trojans" option is selected. Criteria: If the "Find unknown unwanted programs and trojans" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value dwProgramHeuristicsLevel is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies must be configured to find unknown macro viruses.

Finding ID
DTAM105
Rule ID
SV-55231r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM105-McAfee VirusScan heuristics macro level
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Due to the ability of malware to mutate after infection, standard antivirus signatures may not be able to catch new strains or variants of the malware. Typically, these strains and variants will share unique characteristics with others in their virus family. By using a generic signature to detect the shared characteristics, using wildcards where differences lie, the generic signature can detect viruses even if they are padded with extra, meaningless code. This method of detection is Heuristic detection.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Heuristics:" label. Select the "Find unknown macro threats" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Heuristics:" label. Ensure the "Find unknown macro threats" option is selected. Criteria: If the "Find unknown macro threats" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value dwMacroHeuristicsLevel is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies must be configured to scan inside archives.

Finding ID
DTAM106
Rule ID
SV-55232r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM106-McAfee VirusScan scan inside archive
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Malware is often packaged within an archive. In addition, archives might have other archives within. Not scanning archive files introduces the risk of infected files being introduced into the environment.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Compressed files:" label. Select the "Scan inside archives (e.g. .ZIP)" option. Select Save.

Check Content

NOTE: This requirement can be left not configured and marked as Not Applicable if the regularly scheduled on-demand scan, as validated under V-6611, DTAM052, includes the scanning of archive files. From the ePO server console System Tree, select the "Systems" tab, select the asset to be checked, select "Actions", select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Compressed files:" label. Ensure the "Scan inside archives (e.g. .ZIP)" option is selected. Criteria: If the "Scan inside archives (e.g. .ZIP)" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value ScanArchives is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies Actions for When a threat is found must be configured to clean files automatically as first action.

Finding ID
DTAM110
Rule ID
SV-55233r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM110-McAfee VirusScan process primary action
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Malware may have infected a file that is necessary to the user. By configuring the antivirus software to first attempt cleaning the infected file, availability to the file is not sacrificed. If a cleaning attempt is not successful, however, deleting the file is the only safe option so as to ensure the malware does is not introduced onto the system or network.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Actions tab, locate the "When a threat is found:" label. From the "Perform this action first:" pull down menu, select "Clean files automatically". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Actions tab, locate the "When a threat is found:" label. Ensure that for the "Perform this action first:" pull down menu, "Clean files automatically" is selected. Criteria: If "Clean files automatically" is selected for "Perform this action first", this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value for uAction is not 5, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access Default Processes Policies actions for When a threat is found must be configured delete files automatically if first action fails.

Finding ID
DTAM111
Rule ID
SV-55234r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM111-McAfee VirusScan process secondary action
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Malware may have infected a file that is necessary to the user. By configuring the antivirus software to first attempt cleaning the infected file, availability to the file is not sacrificed. If a cleaning attempt is not successful, however, deleting the file is the only safe option so as to ensure the malware does is not introduced onto the system or network.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Actions tab, locate the "When a threat is found:" label. From the "If the first action fails, then perform this action:" pull down menu, select "Delete files automatically". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Actions tab, locate the "When a threat is found:" label. Ensure that from the "If the first action fails, then perform this action:" pull down menu, "Delete files automatically" is selected. Criteria: If "Delete files automatically" is selected for "If the first action fails, then perform this action:", this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value for uSecAction is not 4, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On Delivery Email Scan Policies must be configured to clean attachments as the first action for when an unwanted program is found.

Finding ID
DTAM039
Rule ID
SV-55189r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM039-McAfee VirusScan unwanted programs action
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Delivery Email Scan Policies. Under the Actions tab, locate the "When an unwanted program is found:" label. From the "Perform this action first:" pull down menu, select "Clean attachments". Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Delivery Email Scan Policies. Under the Actions tab, locate the "When an unwanted program is found:" label. Ensure that from the "Perform this action first:" pull down menu, "Clean attachments" is selected. Criteria: If "Clean attachments" is selected for "Perform this action first", this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\ActionOptions Criteria: If the value for uAction_Program is not 5, this is a finding.

Responsibility

System Administrator

McAfee VirusScan On-Demand scan must be configured to detect for unwanted programs.

Finding ID
DTAM058
Rule ID
SV-55207r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM058-McAfee VirusScan check unwanted programs
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

Potentially Unwanted Programs (PUPs) include Spyware, Adware, Remote Administration Tools, Dialers, Password Crackers, Jokes, and Key Loggers. While PUPs do not typically have any infections capability on their own, they rely on malware or other attach mechanisms to be installed onto target hosts, after which they will collect and transfer data from the host to an external host and/or will be used as attach mechanisms. Configuring the antivirus software to attempt to clean the file first will allow for the possibility of a false positive. In most cases, however, the secondary action of delete will be used, mitigating the risk of the PUPs being installed and used maliciously.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Items tab, locate the "Options:" label. Select the "Detect unwanted programs" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Items tab, locate the "Options:" label. Ensure the "Detect unwanted programs" option is selected. Criteria: If "Detect unwanted programs" is selected, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key. [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Spyware] ApplyNVP=1 is present, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan Buffer Overflow Protection Policies must be configured to enable Buffer Overflow Protection.

Finding ID
DTAM130
Rule ID
SV-55235r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM130-McAfee VirusScan buffer overflow protection
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Buffer overflow is an anomaly where a program, while writing data to a buffer, overruns the buffer's boundary and overwrites adjacent memory. This anomaly has been used maliciously, explicitly to craft exploits. Buffer overflow attacks compose greater than 25% of malware attacks. Without buffer overflow protection enabled, systems are more vulnerable to attacks that attempt to overwrite adjacent memory in the stack frame. Buffer overflow protection is only configurable on non-64-bit systems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Buffer Overflow Protection tab, locate the "Buffer Overflow settings:" label. Select the "Enable buffer overflow protection" option. Select Save.

Check Content

NOTE: Buffer Overflow Protection is not installed on 64-bit systems; this check would be Not Applicable to 64-bit systems. NOTE: On 32-bit systems, when Host Intrusion Prevention is also installed, Buffer Overflow Protection will show as "Disabled because a Host Intrusion Prevention product is installed"; this check would be Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Buffer Overflow Protection tab, locate the "Buffer Overflow settings:" label. Ensure the "Enable buffer overflow protection" option is selected. Criteria: If the "Enable buffer overflow protection" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value BOPEnabled is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan Buffer Overflow Protection Policies must be configured for Protection mode.

Finding ID
DTAM131
Rule ID
SV-55236r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM131-McAfee VirusScan buffer overflow protection
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Buffer overflow is an anomaly where a program, while writing data to a buffer, overruns the buffer's boundary and overwrites adjacent memory. This anomaly has been used maliciously, explicitly to craft exploits. Buffer overflow attacks compose greater than 25% of malware attacks. Without buffer overflow protection enabled, systems are more vulnerable to attacks that attempt to overwrite adjacent memory in the stack frame. Protection mode will ensure buffer overflow is detected and blocked. Otherwise, only a warning message will be logged. Buffer overflow protection is only configurable on non-64-bit systems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Buffer Overflow Protection tab, locate the "Buffer Overflow settings:" label. Select the "Protection mode" option. Select Save.

Check Content

NOTE: Buffer Overflow Protection is not installed on 64-bit systems; this check would be Not Applicable to 64-bit systems. NOTE: On 32-bit systems, when Host Intrusion Prevention is also installed, Buffer Overflow Protection will show as "Disabled because a Host Intrusion Prevention product is installed"; this check would be Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Buffer Overflow Protection tab, locate the "Buffer Overflow settings:" label. Ensure the "Protection mode" option is selected. Criteria: If the "Protection mode" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value BOPMode is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan Buffer Overflow Protection Policies must be configured to display a dialog box when a buffer overflow is detected.

Finding ID
DTAM132
Rule ID
SV-55237r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM132-McAfee VirusScan buffer overflow message
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

An effective awareness program explains proper rules of behavior for use of an organization's IT systems and information. Accordingly, awareness programs should include guidance to users on malware incident prevention, which can help reduce the frequency and severity of malware incidents. Organizations should also make users aware of policies and procedures that apply to malware incident handling, such as how to identify if a host may be infected, how to report a suspected incident, and what users need to do to assist with incident handling. Ensuring the antivirus software alerts the users when a buffer overflow is detected will ensure the user is aware of the incident and be able to more closely relate the incident to actions being performed by the user at the time of the detection.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Buffer Overflow Protection tab, locate the "Client system warning:" label. Select the "Show the messages dialog box when a buffer overflow is detected" option. Select Save.

Check Content

NOTE: Buffer Overflow Protection is not installed on 64-bit systems; this check would be Not Applicable to 64-bit systems. NOTE: On 32-bit systems, when Host Intrusion Prevention is also installed, Buffer Overflow Protection will show as "Disabled because a Host Intrusion Prevention product is installed"; this check would be Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Buffer Overflow Protection tab, locate the "Client system warning:" label. Ensure the "Show the messages dialog box when a buffer overflow is detected" option is selected. Criteria: If the "Show the messages dialog box when a buffer overflow is detected" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value BOPShowMessages is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan Buffer Overflow Protection Policies must be configured to record scanning activity in a log file.

Finding ID
DTAM133
Rule ID
SV-55239r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM133-McAfee VirusScan buffer overflow log
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Log management is essential to ensuring that computer security records are stored in sufficient detail for an appropriate period of time. Routine log analysis is beneficial for identifying security incidents, policy violations, fraudulent activity, and operational problems. Logs are also useful when performing auditing and forensic analysis, supporting internal investigations, establishing baselines, and identifying operational trends and long-term problems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Reports tab, locate the "Log to file:" label. Select the "Enable activity logging and accept the default location for the log file or specify a new location" option. Select Save.

Check Content

NOTE: Buffer Overflow Protection is not installed on 64-bit systems and would be Not Applicable to 64-bit systems. NOTE: On 32-bit systems, when Host Intrusion Prevention is also installed, Buffer Overflow Protection will show as "Disabled because a Host Intrusion Prevention product is installed"; this check would be Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Reports tab, locate the "Log to file:" label. Ensure the "Enable activity logging and accept the default location for the log file or specify a new location" option is selected. Criteria: If the "Enable activity logging and accept the default location for the log file or specify a new location" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value bLogToFile_Ent is 1, this is not a finding. If the value is 0, this is a finding.

Responsibility

System Administrator

McAfee VirusScan Buffer Overflow Protection Policies log file size must be restricted and be configured to at least 10MB.

Finding ID
DTAM134
Rule ID
SV-55238r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM134-McAfee VirusScan log size limitation
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

While logging is imperative to forensic analysis, logs could grow to the point of impacting disk space on the system. In order to avoid the risk of logs growing to the size of impacting the operating system, the log size will be restricted, but must also be large enough to retain forensic value.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Reports tab, locate the "Log file size" label. Select the "Limit the size of log file" option. For the "Maximum log file size:", select a value of 10MB or more. Select Save.

Check Content

NOTE: Buffer Overflow Protection is not installed on 64-bit systems and would be Not Applicable to 64-bit systems. NOTE: On 32-bit systems, when Host Intrusion Prevention is also installed, Buffer Overflow Protection will show as "Disabled because a Host Intrusion Prevention product is installed"; this check would be Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Buffer Overflow Protection Policies. Under the Reports tab, locate the "Log file size:" label. Ensure the "Limit the size of log file" option is selected. Ensure the "Maximum log file size" is at least 10MB. Criteria: If the "Limit the size of log file" option is selected and the "Maximum log file size:" is at least 10MB, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value of bLimitSize_Ent is 1 and dwMaxLogSizeMB_Ent is configured to Decimal (10) or higher, this is not a finding. If the bLimitSize_Ent is 0 or if dwMaxLogSizeMB_Ent is less than Decimal (10), this is a finding.

Responsibility

System Administrator

McAfee VirusScan Unwanted Programs Policies must be configured to detect spyware.

Finding ID
DTAM135
Rule ID
SV-55241r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM135-McAfee VirusScan detection of Spyware
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Spyware is software that aids in gathering information about a person or organization without their knowledge, and that may send such information to another entity without the consumer's consent, or that asserts control over a computer without the user's knowledge. Spyware may try to deceive users by bundling itself with desirable software. A spyware infestation can create significant unwanted CPU activity, disk usage, and network traffic. Some types of spyware disable software firewalls and antivirus software. Detecting, blocking, and eradicating malicious spyware or preventing it from being installed will alleviate the negative side effects of the spyware.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Unwanted Programs Policies. Under the Scan Items tab, locate the "Select categories of unwanted programs to detect:" label. Select the "Spyware" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Unwanted Programs Policies. Under the Scan Items tab, locate the "Select categories of unwanted programs to detect:" label. Ensure the "Spyware" option is selected. Criteria: If the "Spyware" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\NVP Criteria: If the value DetectSpyware is 1, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan Unwanted Programs Policies must be configured to detect adware.

Finding ID
DTAM136
Rule ID
SV-55242r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM136 - McAfee VirusScan detection of Adware
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Adware, like spyware, is, at best, an annoyance by presenting unwanted advertisement to the user of a computer, sometimes in the form of a popup. At worst, it redirects the user to malicious websites. Detecting and blocking will mitigate the likelihood of users being tricked into visiting sites with malicious content.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Unwanted Programs Policies. Under the Scan Items tab, locate the "Select categories of unwanted programs to detect:" label. Select the "Adware" option. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Unwanted Programs Policies. Under the Scan Items tab, locate the "Select categories of unwanted programs to detect:" label. Ensure the "Adware" option is selected. Criteria: If the "Adware" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\NVP Criteria: If the value DetectAdware is 1, this is not a finding.

Responsibility

System Administrator

The antivirus signature file age must not exceed 7 days.

Finding ID
DTAG008
Rule ID
SV-55133r2_rule
Severity
Cat I
CCE
(None)
Group Title
DTAG008 - The antivirus signature file age exceeds 7 days.
CCI
CCI-001240
Target Key
(None)
Documentable
No
Discussion

Antivirus signature files are updated almost daily by antivirus software vendors. These files are made available to antivirus clients as they are published. Keeping virus signature files as current as possible is vital to the security of any system.

Fix Text

Update client machines via ePO client task. If this fails to update the client, update antivirus signature files as your local process describes (e.g., auto update or runtime executable.)

Check Content

Guidance in DTAM016 requires updates be run daily, automatically or manually. If compliant, the DAT date will be within 24-48 hours old. Since automated update tasks’ success is not guaranteed, the expectation is for update task success to be frequently monitored and corrected when unsuccessful. To allow for that correction, the minimum acceptable threshold for DAT date is not to exceed 7 days. On the client machine, right-click on the McAfee red shield icon in the taskbar. Choose "About". Scroll down to the "McAfee VirusScan Enterprise + AntiSpyware Enterprise" section. Review the date for "DAT Created On:". Criteria: If the "DAT Created On:" date is older than 7 days from the current date, this is a finding. From the ePO server console System Tree, select the "Systems" tab, select the asset to be checked, and double-click to open its properties. Under the System Information, scroll down to the VirusScan Enterprise section and click on the "More" link in the top-right portion of the VirusScan Enterprise section. Scroll down to the General section and confirm the DAT Date reflected is within the last 7 days. Criteria: If the DAT Date is older than 7 days from the current date, this is a finding. NOTE: If the vendor or trusted site's files are also older than 7 days and match the date of the signature files on the machine, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On-Access General Policies Artemis sensitivity level must be configured to medium or higher.

Finding ID
DTAM137
Rule ID
SV-55243r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM137-McAfee VirusScan File Reputation Service
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Antivirus software vendors use collective intelligence from sensors and cross-vector intelligence from web, email, and network threats to compile scores that reflect the likelihood of whether a file in question is malware. The collective intelligence is constantly being updated, more frequently than the typical daily antivirus signature files. With File Reputation lookup, a more real-time response to potential malicious code is realized than with the local-running antivirus software, since by querying the cloud-based database when a file appears to be suspicious, up-to-the-minute intelligence is provided. This type of protection reduces the threat protection time period from days to milliseconds, increases malware detection rates, and reduces downtime and remediation costs associated with malware attacks. Using File Reputation lookup is mandated by US CYBERCOM on DoD systems.

Fix Text

NOTE: For systems on the SIPRnet, this check is Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the General tab, locate the "Artemis (Heuristic network check for suspicious files):" label. Select the "Medium" option. Select Save.

Check Content

NOTE: For systems on the SIPRnet, this check is Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the General tab, locate the "Artemis (Heuristic network check for suspicious files):" label. Ensure the "Medium" option, or higher, is selected. Criteria: If the "Medium" option, or higher, is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner Criteria: If the value of ArtemisEnabled is REG_DWORD = 0, this is a finding. If the value of ArtemisLevel is REG_DWORD = 0 or REG_DWORD = 1, this is a finding. If the value of ArtemisEnabled is REG_DWORD = 1 and the ArtemisLevel is REG_DWORD = 2, 3 or 4, this is not a finding.

Responsibility

System Administrator

McAfee VirusScan On Delivery Email Scan Policies, When a threat is found, must be configured to clean attachments as the first action and delete attachments if the first action fails.

Finding ID
DTAM162
Rule ID
SV-55180r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM162-McAfee VirusScan Email on-delivery threat second action
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Actions tab, locate the "When a threat is found:" label. For the "If the first action fails, then perform this action:" pull down menu, select "Delete attachments". Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Actions tab, locate the "When a threat is found:" label. Ensure that for the "If the first action fails, then perform this action:" pull down menu, "Delete attachments" is selected. Criteria: If "Delete attachments" is selected for "If the first action fails, then perform this action:", this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\ActionOptions Criteria: If the value for uSecAction is not 4, this is a finding.

McAfee VirusScan On Delivery Email Scan Policies must be configured to delete attachments if the first action fails for when an unwanted program is found.

Finding ID
DTAM163
Rule ID
SV-55190r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM163-McAfee VirusScan Email on-delivery unwanted program second action
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Actions tab, locate the "When an unwanted program is found:" label. From the "If the first action fails, then perform this action:" pull down menu, select "Delete attachments". Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Actions tab, locate the "When an unwanted program is found:" label. Ensure that from the "If the first action fails, then perform this action:" pull down menu, "Delete attachments" is selected. Criteria: If "Delete attachments" is selected for "If the first action fails, then perform this action:", this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\ActionOptions Criteria: If the value for uSecAction_Program is not 4, this is a finding.

McAfee VirusScan Access Protection Policies must be configured to prevent McAfee services from being stopped.

Finding ID
DTAM138
Rule ID
SV-55244r2_rule
Severity
Cat I
CCE
(None)
Group Title
DTAM138 - Access Protection McAfee services protection
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

When the Prevent McAfee services from being stopped check box is selected under Access Protection, VSE will prevent anyone except the System account from terminating McAfee services. This protects VirusScan from being disabled by malicious programs that seek to circumvent virus protection programs by terminating their services.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection settings:" label. Select the "Prevent McAfee services from being stopped" option. Select Save.

Check Content

Note: If the HIPS signature 3892 is enabled to provide the "Prevent termination of McAfee processes" protection, this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection settings:" label. Ensure the "Prevent McAfee services from being stopped" option is selected. Criteria: If the "Prevent McAfee services from being stopped" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value of PVSPTEnabled is REG_DWORD = 1, this is not a finding.

McAfee VirusScan Access Protection Policies must be configured to record scanning activity in a log file.

Finding ID
DTAM139
Rule ID
SV-55245r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM139 - Access Protection logging of scan activity
CCI
CCI-000130
Target Key
(None)
Documentable
No
Discussion

Log management is essential to ensuring that computer security records are stored in sufficient detail for an appropriate period of time. Routine log analysis is beneficial for identifying security incidents, policy violations, fraudulent activity, and operational problems. Logs are also useful when performing auditing and forensic analysis, supporting internal investigations, establishing baselines, and identifying operational trends and long-term problems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Access Protection Policies. Under the Reports tab, locate the "Log to file:" label. Select the "Enable activity logging and accept the default location for the log file or specify a new location" option. Select Save.

Check Content

Note: If DTAM161 "McAfee VirusScan Access Protection Policies must be configured to enable access protection" has been marked as "Not Applicable", this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Access Protection Policies. Under the Reports tab, locate the "Log to file:" label. Ensure the "Enable activity logging and accept the default location for the log file or specify a new location" option is selected. Criteria: If the "Enable activity logging and accept the default location for the log file or specify a new location" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value of bLogToFile is REG_DWORD = 1, this is not a finding.

McAfee VirusScan Access Protection log file size must be restricted and be configured to at least 10MB.

Finding ID
DTAM140
Rule ID
SV-55246r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM140 - Access Protection log file restriction
CCI
CCI-000140
Target Key
(None)
Documentable
No
Discussion

While logging is imperative to forensic analysis, logs could grow to the point of impacting disk space on the system. In order to avoid the risk of logs growing to the size of impacting the operating system, the log size will be restricted, but must also be large enough to retain forensic value.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Access Protection Policies. Under the Reports tab, locate the "Log file size:" label. Select the "Limit the size of log file" option. For the "Maximum log file size:", select a value of at least 10MB or more. Select Save.

Check Content

Note: If DTAM161 "McAfee VirusScan Access Protection Policies must be configured to enable access protection" has been marked as "Not Applicable", this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the Access Protection Policies. Under the Reports tab, locate the "Log file size:" label. Ensure the "Limit the size of log file" option is selected. Ensure the "Maximum log file size" is 10MB or more. Criteria: If the "Limit the size of log file" option is selected and the "Maximum log file size:" is 10MB or more, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value of bLimitSize is 1 and dwMaxLogSizeMB is configured to Decimal (10) or higher, this is not a finding.

McAfee VirusScan Access Protection: Common Standard Protection must be set to prevent modification of McAfee files and settings.

Finding ID
DTAM141
Rule ID
SV-55247r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM141 - Access Protection prevent modification of McAfee files and settings
CCI
CCI-001813
Target Key
(None)
Documentable
No
Discussion

Many malicious programs have attempted to disable VirusScan by stopping services and processes and leaving the system vulnerable to attack. Self-protection is an important feature of VSE that prevents malicious programs from disabling VirusScan or any of its services or processes. Many trojans and viruses will attempt to terminate or even delete security products. VSE's self-protection features protect VirusScan registry values and processes from being altered or deleted by malicious code. This rule protects the McAfee security product from modification by any process not listed in the policy's exclusion list.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Select both "Prevent modification of McAfee files and settings" (Block and Report) options. Select Save.

Check Content

Note: If the HIPS signature 3898 is enabled to provide this same protection, this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure "Prevent modification of McAfee files and settings" (Block and Report) options are both selected. Criteria: If "Prevent modification of McAfee files and settings" (Block and Report) options are both selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure "Prevent modification of McAfee files and settings" (Block and Report) options are selected. Criteria: If "Prevent modification of McAfee files and settings" (Block and Report) options are both selected, this is not a finding.

McAfee VirusScan Access Protection: Common Standard Protection must be set to prevent modification of McAfee Common Management Agent files and settings.

Finding ID
DTAM142
Rule ID
SV-55248r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM142 - Access Protection preventing modification of McAfee CMA
CCI
CCI-001813
Target Key
(None)
Documentable
No
Discussion

Many malicious programs have attempted to disable VirusScan by stopping services and processes and leaving the system vulnerable to attack. Self-protection is an important feature of VSE that prevents malicious programs from disabling VirusScan or any of its services or processes. Many trojans and viruses will attempt to terminate or even delete security products. VSE's self-protection features protect VirusScan registry values and processes from being altered or deleted by malicious code. This rule protects the McAfee security product from modification by any process not listed in the policy's exclusion list.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Select both "Prevent modification of McAfee Common Management Agent files and settings" (Block and Report) options. Select Save.

Check Content

Note: If the HIPS signature 3899 is enabled to provide this same protection, this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure both "Prevent modification of McAfee Common Management Agent files and settings" (Block and Report) options are selected. Criteria: If both "Prevent modification of McAfee Common Management Agent files and settings" (Block and Report) options are selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure "Prevent modification of McAfee Common Management Agent files and settings" (Block and Report) options are selected. Criteria: If "Prevent modification of McAfee Common Management Agent files and settings" (Block and Report) options are both selected, this is not a finding.

McAfee VirusScan Access Protection: Common Standard Protection must be set to prevent modification of McAfee Scan Engine files and settings.

Finding ID
DTAM143
Rule ID
SV-55249r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM143 - Access Protection prevent modification of McAfee scan engine
CCI
CCI-001813
Target Key
(None)
Documentable
No
Discussion

Many malicious programs have attempted to disable VirusScan by stopping services and processes and leaving the system vulnerable to attack. Self-protection is an important feature of VSE that prevents malicious programs from disabling VirusScan or any of its services or processes. Many trojans and viruses will attempt to terminate or even delete security products. VSE's self-protection features protect VirusScan registry values and processes from being altered or deleted by malicious code. This rule protects the McAfee security product from modification by any process not listed in the policy's exclusion list.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Select both "Prevent modification of McAfee Scan Engine files and settings" (Block and Report) options. Select Save.

Check Content

Note: If the HIPS signature 3900 is enabled to provide this same protection, this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure "Prevent modification of McAfee Scan Engine files and settings" (Block and Report) options are both selected. Criteria: If "Prevent modification of McAfee Scan Engine files and settings" (Block and Report) options are both selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, Access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure "Prevent modification of McAfee Scan Engine files and settings" (Block and Report) options are both selected. Criteria: If "Prevent modification of McAfee Scan Engine files and settings" (Block and Report) options are both selected, this is not a finding.

McAfee VirusScan Access Protection: Common Standard Protection must be set to prevent termination of McAfee processes.

Finding ID
DTAM144
Rule ID
SV-55250r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM144 - Access Protection prevent termination of McAfee processes
CCI
CCI-000213
Target Key
(None)
Documentable
No
Discussion

Many malicious programs have attempted to disable VirusScan by stopping services and processes and leaving the system vulnerable to attack. Self-protection is an important feature of VSE that prevents malicious programs from disabling VirusScan or any of its services or processes. Many trojans and viruses will attempt to terminate or even delete security products. VSE's self-protection features protect VirusScan registry values and processes from being altered or deleted by malicious code. This rule protects the McAfee security product from modification by any process not listed in the policy's exclusion list.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Select both "Prevent termination of McAfee processes" (Block and Report) options. Select Save.

Check Content

Note: If the HIPS signature 3892 is enabled to provide this same protection, this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure "Prevent termination of McAfee processes" (Block and Report) options are both selected. Criteria: If "Prevent termination of McAfee processes" (Block and Report) options are both selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure both "Prevent termination of McAfee processes" (Block and Report) options are selected. Criteria: If both "Prevent termination of McAfee processes" (Block and Report) options are selected, this is not a finding.

McAfee VirusScan Access Protection Rules Common Standard Protection must be set to block and report when common programs are run from the Temp folder.

Finding ID
DTAM145
Rule ID
SV-55251r5_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM145 - Access Protection detect programs run from Temp folder
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

This rule will block common programs from running from the Temp directory; however, this rule is much more restrictive in that it stops nearly all processes from launching in the Temp folder. Most viruses need to be run once by a person before infecting a computer. This can be done in many ways, such as opening an executable attachment in an email or downloading a program from the Internet. An executable needs to exist on the disk before Windows can run it. A common way for applications to achieve this is to save the file in the user's or system's Temp directory and then run it. One purpose of this rule is to enforce advice that is frequently given to users: "don't open attachments from email." The other purpose of this rule is to close security holes introduced by application bugs. Older versions of Outlook and Internet Explorer are notorious for automatically executing code without the user needing to do anything but preview an email or view a website.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Select the "Prevent common programs from running files from the temp folder" (Block and Report) option. Select Save.

Check Content

Note: If the HIPS signatures 7010 and 7035 are enabled to provide this same protection, this check is Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure the "Prevent common programs from running files from the Temp folder" (Block and Report) option is selected. Criteria: If the "Prevent common programs from running files from the Temp folder" (Block and Report) option is selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, Access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure the "Prevent common programs from running files from the Temp folder" (Block and Report) option is selected. Criteria: If the "Prevent common programs from running files from the Temp folder" (Block and Report) option is selected, this is not a finding.

McAfee VirusScan Access Protection: Common Standard Protection must be set to prevent hooking of McAfee processes.

Finding ID
DTAM146
Rule ID
SV-55252r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM146 - Access Protection prevent hooking of McAfee processes
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Hooking covers a range of techniques used to alter or augment the behavior of an operating system, of applications, or of other software components by intercepting function calls, messages, or events passed between software components. Code that handles such intercepted function calls, events, or messages is called a 'hook'. Hooking can also be used by malicious code. For example, rootkits, pieces of software that try to make themselves invisible by faking the output of API calls that would otherwise reveal their existence, often use hooking techniques. This rule prevents other processes from hooking of McAfee processes.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Select both "Prevent hooking of McAfee processes" (Block and Report) options. Select Save.

Check Content

Note: If the HIPS signature 6051 is enabled to provide this same protection, this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure both "Prevent hooking of McAfee processes" (Block and Report) options are selected. Criteria: If both "Prevent hooking of McAfee processes" (Block and Report) options are selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Standard Protection". Ensure both "Prevent hooking of McAfee processes" (Block and Report) options are both selected. Criteria: If "Prevent hooking of McAfee processes" (Block and Report) options are both selected, this is not a finding.

McAfee VirusScan Access Protection: Common Maximum Protection must be set to detect and log launching of files from the Downloaded Programs Files folder.

Finding ID
DTAM147
Rule ID
SV-55253r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM147-Access Protection detect and log launching of downloaded programs
CCI
CCI-001169
Target Key
(None)
Documentable
No
Discussion

A common distribution method for adware and spyware is to have the user download an executable file and run it automatically from the Downloaded Program Files folder. This rule is specific to Microsoft Internet Explorer and prevents software installations through the web browser. Internet Explorer runs code from the Downloaded Program Files directory, notably ActiveX controls. Some vulnerabilities in Internet Explorer and viruses place an .exe file into this directory and run it. This rule closes that attack vector.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Maximum Protection". Select the "Prevent launching of files from the Downloaded Program Files folder" (Report) option. Select Save.

Check Content

Note: If the HIPS signature 3910 is enabled to provide this same protection, this check is not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Maximum Protection". Ensure the "Prevent launching of files from the Downloaded Program Files folder" (Report) option is selected. Criteria: If the "Prevent launching of files from the Downloaded Program Files folder" (Report) option is selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Common Maximum Protection". Ensure the "Prevent launching of files from the Downloaded Program Files folder" (Report) option is selected. Criteria: If the "Prevent launching of files from the Downloaded Program Files folder" (Report) option is selected, this is not a finding.

McAfee VirusScan Access Protection: Anti-Spyware Maximum Protection must be set to block and log execution of scripts from the Temp folder.

Finding ID
DTAM148
Rule ID
SV-55254r6_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM148 - Access Protection log execution of scripts from Temp folder
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

This rule prevents the Windows scripting host from running VBScript and JavaScript scripts from the Temp directory. This would protect against a large number of trojans and questionable web installation mechanisms that are used by many adware and spyware applications.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Spyware Maximum Protection". Select the "Prevent execution of scripts from the Temp folder" (Block and Report) option. Select Save.

Check Content

Note: If the HIPS signature 7035 is enabled to provide this same protection, this check is Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Spyware Maximum Protection". Ensure the "Prevent execution of scripts from the Temp folder" (Block and Report) option is selected. Criteria: If the "Prevent execution of scripts from the Temp folder" (Block and Report) option is selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, access the local VirusScan console by clicking Start >> All Programs >> McAfee >> VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Spyware Maximum Protection". Ensure the "Prevent execution of scripts from the Temp folder" (Block and Report) option is selected. Criteria: If the "Prevent execution of scripts from the Temp folder" (Block and Report) option is selected, this is not a finding.

McAfee VirusScan Access Protection: Anti-Virus Standard Protection must be set to prevent remote creation of autorun files.

Finding ID
DTAM149
Rule ID
SV-55255r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM149 - Access Protection prevent remote creation of autorun files
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Autorun files are used to automatically launch program files, typically setup files from CDs. Preventing other computers from making a connection and creating or altering autorun.inf files can prevent spyware and adware from being executed. There are many spyware and virus programs distributed on CDs.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Select both "Prevent remote creation of autorun files" (Block and Report) options. Select Save.

Check Content

Note: If the HIPS signature 3886 is enabled to provide this same protection, this check is Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Ensure both "Prevent remote creation of autorun files" (Block and Report) options are selected. Criteria: If both "Prevent remote creation of autorun files" (Block and Report) options are selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Ensure "Prevent remote creation of autorun files" (Block and Report) options are both selected. Criteria: If "Prevent remote creation of autorun files" (Block and Report) options are both selected, this is not a finding.

McAfee VirusScan Access Protection: Anti-Virus Standard Protection must be set to prevent mass mailing worms from sending mail.

Finding ID
DTAM150
Rule ID
SV-55256r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM150-Access Protection mass mailing worms
CCI
CCI-001170
Target Key
(None)
Documentable
No
Discussion

Many viruses and worms find email addresses on the infected system and send themselves to these addresses. They do this by connecting directly to the email servers whose names they have harvested from the local system. This rule prevents any process from talking to a foreign email server using SMTP. By blocking this communication, a machine may become infected with a new mass mailing virus, but that virus will be unable to spread further by email. It prevents outbound access to SMTP ports 25 and 587 on all programs except known email clients listed as an exclusion.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Select both "Prevent mass mailing worms from sending email" (Block and Report) options. Select Save.

Check Content

NOTE: If the system being reviewed has the function of sending email via the SMTP protocol, this setting is not applicable. NOTE: Since there is no HIPS signature to provide this same protection, this check is applicable even if HIPS is enabled. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Ensure "Prevent mass mailing worms from sending email" (Block and Report) options are both selected. Click Edit. Under the "Processes to exclude:" section, verify no processes are listed. If any processes are listed, they must be documented with, and approved by, the IAO/IAM. Criteria: Criteria: If "Prevent mass mailing worms from sending email" (Block and Report) options are not both selected, this is a finding. If "Prevent mass mailing worms from sending email" (Block and Report) options are both selected, and any listed "Processes to exclude:" are approved by the IAO/IAM, this is not a finding. If "Prevent mass mailing worms from sending email" (Block and Report) options are both selected, but listed "Processes to exclude:" have not been approved by the IAO/IAM, this is a finding. Registry keys are not available for this setting. To validate from client side, Access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Ensure "Prevent mass mailing worms from sending email" (Block and Report) options are both selected. Click Edit. Under the "Processes to exclude:" section, verify no processes are listed. If any processes are listed, they must be documented with, and approved by, the IAO/IAM. Criteria: If "Prevent mass mailing worms from sending email" (Block and Report) options are not both selected. This is a finding. If "Prevent mass mailing worms from sending email" (Block and Report) options are both selected, and any listed "Processes to exclude:" are approved by the IAO/IAM, this is not a finding. If "Prevent mass mailing worms from sending email" (Block and Report) options are both selected, but listed "Processes to exclude:" have not been approved by the IAO/IAM, this is a finding.

McAfee VirusScan Access Protection: Anti-Virus Standard Protection must be set to prevent IRC communication.

Finding ID
DTAM151
Rule ID
SV-55257r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM151-Access Protection prevent IRC communication
CCI
CCI-001170
Target Key
(None)
Documentable
No
Discussion

Internet Relay Chat (IRC) is the preferred communication method used by botnet herders and remote-access trojans to control botnets (a set of scripts or an independent program that connects to IRC). IRC allows an attacker to control infected machines that are sitting behind network address translation (NAT), and the bot can be configured to connect back to the command and control server listening on any port.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Select both "Prevent IRC communication" (Block and Report) options. Select Save.

Check Content

NOTE: If IRC Communication is enabled on a Classified network, in accordance with published Ports, Protocols, and Services Management (PPSM) guidelines, this requirement is not applicable. NOTE: Since there is no HIPS signature to provide this same protection, this check is applicable even if HIPS is enabled. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Ensure both "Prevent IRC communication" (Block and Report) options are selected. Criteria: If both "Prevent IRC communication" (Block and Report) options are selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, Access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Virus Standard Protection". Ensure both "Prevent IRC communication" (Block and Report) options are selected. Criteria: If both "Prevent IRC communication" (Block and Report) options are selected, this is not a finding.

McAfee VirusScan On-Access General Policies must be configured to not exclude any script processes from being scanned unless the process exclusions have been documented with, and approved by, the ISSO/ISSM/DAA.

Finding ID
DTAM152
Rule ID
SV-55258r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM152--McAfee VirusScan on-access script exclusions
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Many attackers use toolkits containing several different types of utilities and scripts that can be used to probe and attack hosts. Scripts are a common carrier of malware and none should be excluded from scanning. In the unlikely event that excluding scanning a script impacts the operational function and/or availability of a system, and reasonable mitigation efforts have been put into place, the exclusion may be put into place but must be documented with, and approved by, the ISSO/ISSM/DAA.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the ScriptScan tab, locate the "ScriptScan exclusions" label. Remove any exclusions listed in the Process field.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the ScriptScan tab, locate the "ScriptScan exclusions:" label. Ensure there are no exclusions listed in the Process field. Criteria: If there are no exclusions listed in the Process field, this is a not finding. If there are exclusions listed in the Process field, and the exclusions have been documented with, and approved by, the ISSO/ISSM/DAA, this is not a finding. If there are exclusions listed in the Process field, and the exclusions have not been documented with, and approved by, the ISSO/ISSM/DAA, this is a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Script Scanner Criteria: If the ExcludedProcesses REG_MULTI_SZ has any entries, and the excluded processes have not been documented with, and approved by, the ISSO/ISSM/DAA, this is a finding.

McAfee VirusScan On-Access Default Processes Policies must be configured to not exclude any files from being scanned unless exclusions have been documented with, and approved by, the ISSO/ISSM/DAA.

Finding ID
DTAM153
Rule ID
SV-55259r4_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM153--McAfee VirusScan on-access file exclusions
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

When scanning for malware, excluding specific files will increase the risk of a malware-infected file going undetected. By configuring antivirus software without any exclusions, the scanner has a higher success rate at detecting and eradicating malware.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Exclusions tab, locate the "What not to scan:" label. Remove any exclusions listed.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Exclusions tab, locate the "What not to scan:" label. Ensure there are no exclusions listed. If exclusions are listed, verify they have been documented and approved by the ISSO/ISSM/DAA. Criteria: If there are no exclusions listed in the "What not to scan:" field, this is a not finding. If there are exclusions listed in the "What not to scan:" field, and the exclusions have been documented with, and approved by, the ISSO/ISSM/AO, this is not a finding. If there are exclusions listed in the "What not to scan:" field, and the exclusions have not been documented with, and approved by, the ISSO/ISSM/AO, this is a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value NumExcludeItems is 0, this is not a finding. If NumExcludeItems is not 1 or greater, and exclusions have not been documented with and approved by the ISSO/ISSM/AO, this is a finding. If NumExcludeItems is 1 or greater, and exclusions have been approved by the ISSO/ISSM/AO, this is not a finding.

McAfee VirusScan On-Demand scan must be configured to scan memory for rootkits.

Finding ID
DTAM154
Rule ID
SV-55260r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM154-McAfee VirusScan on-demand memory rootkits
CCI
CCI-001241
Target Key
(None)
Documentable
No
Discussion

A rootkit is a stealthy type of software, usually malicious, and is designed to mask the existence of processes or programs from normal methods of detection. Rootkits will often enable continued privileged access to a computer. Scanning and handling detection of rootkits will mitigate the likelihood of rootkits being installed and used maliciously on the system.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Scan Locations tab, locate the "Locations to scan:" label. In the drop-down menus, select "Memory for rootkits". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Scan Locations tab, locate the "Locations to scan:" label. Ensure the "Memory for rootkits" option is displayed. Criteria: If "Memory for rootkits" is displayed in the configuration for the daily or weekly On Demand Scan, this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [ScanItems] szScanItemX=SpecialScanForRootkits is present, this is not a finding. For the values of szScanItemX, the character X represents some integer =>0. Example: szScanItem0=All fixed disks, szScanItem1=SpecialMemory.

McAfee VirusScan On-Demand scan actions, When an unwanted program is found must be configured to clean files automatically as first action.

Finding ID
DTAM155
Rule ID
SV-55261r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM155-McAfee VirusScan on-demand unwanted programs first action
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Malware may have infected a file that is necessary to the user. By configuring the antivirus software to first attempt cleaning the infected file, availability to the file is not sacrificed. If a cleaning attempt is not successful, however, deleting the file is the only safe option so as to ensure the malware is not introduced onto the system or network.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Actions tab, locate the "When an unwanted program is found:" label. For the "Perform this action first:" pull down menu, select "Clean files". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Actions tab, locate the "When an unwanted program is found:" label. Ensure that for the "Perform this action first:" pull down menu, "Clean files" is selected. Criteria: If "Clean files" is selected for "Perform this action first", this is not a finding. Locally, on the client machine, use the Windows Explorer to navigate to the following folder: (This folder may be hidden.) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Spyware] uAction_Program=5, this is not a finding.

McAfee VirusScan On-Demand scan actions, When an unwanted program is found must be configured to delete files automatically if first action fails.

Finding ID
DTAM164
Rule ID
SV-55262r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM164-McAfee VirusScan Email on-delivery threat second action
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Malware may have infected a file that is necessary to the user. By configuring the antivirus software to first attempt cleaning the infected file, availability to the file is not sacrificed. If a cleaning attempt is not successful, however, deleting the file is the only safe option so as to ensure the malware is not introduced onto the system or network.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Task Name column, select the weekly on demand task. Under the Actions tab, locate the "When an unwanted program is found:" label. From the "If the first action fails, then perform this action:" pull down menu, select "Delete files". Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Tasks on a Single System. From the list of available tasks in the Task Name column, with the assistance of the ePO SA, identify the weekly on demand client scan task. In the same row as the client scan task under review, under the Task Type column, ensure it is an "On Demand scan" and in the Status column, ensure that the status is "Enabled". In the Actions column, select "Edit Assignment". In the Task to Schedule: area, verify the Product is "VirusScan Enterprise 8.8.0" and the Task Type is "On Demand Scan". In the Task name column, select "View Selected Task". Under the Actions tab, locate the "When an unwanted program is found:" label. Ensure that from the "If the first action fails, then perform this action:" pull down menu, "Delete files" is selected. Criteria: If "Delete files" is selected for "If the first action fails, then perform this action:", this is not a finding. On the client machine, use the Windows Explorer to navigate to the following folder: %SystemDrive%\Documents and Settings\All Users\Application Data\McAfee\Common Framework\Task (32-Bit) %SystemDrive%\ProgramData\McAfee\Common Framework\Task (64-Bit) If folder(s) do not exist, an alternative method of validating is via the following registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\McAfee\DesktopProtection\Tasks] and are referenced by a GUID for each task. Multiple .ini files will be stored in this folder, one for each task defined on the ePO server for this client. The name for each task is identified in the first section of the file under the [Task] section on the TaskName= "" line. Additionally, a TaskType= line is provided to describe the type of scan. In this case, TaskType=VSC700_Scan_Task is expected. Information for this check is determined by examining the contents of this file. Criteria: If [Spyware] uSecAction_Program=4, this is not a finding.

McAfee VirusScan On-Delivery Email Scan Policies Artemis sensitivity level must be configured to medium or higher.

Finding ID
DTAM157
Rule ID
SV-55264r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM157-McAfee VirusScan Email on-delivery Artemis sensitivity level
CCI
CCI-000366
Target Key
(None)
Documentable
No
Discussion

Antivirus software vendors use collective intelligence from sensors and cross-vector intelligence from web, email, and network threats to compile scores that reflect the likelihood of whether a file in question is malware. The collective intelligence is constantly being updated, more frequently than the typical daily antivirus signature files. With File Reputation lookup, a more real-time response to potential malicious code is realized than with the local-running antivirus software, since by querying the cloud-based database when a file appears to be suspicious, up-to-the-minute intelligence is provided. This type of protection reduces the threat protection time period from days to milliseconds, increases malware detection rates, and reduces downtime and remediation costs associated with malware attacks. Using File Reputation lookup is mandated by US CYBERCOM on DoD systems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Artemis (Heuristic network check for suspicious files):" label. Select the "Medium" option. Select Save.

Check Content

Note: For systems on the SIPRNet, this check is Not Applicable. Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Scan Items tab, locate the "Artemis (Heuristic network check for suspicious files):" label. Ensure the Sensitivity level is set to "Medium" or higher. Criteria: If the Sensitivity level is set to "Medium" or higher, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner Criteria: If the value of ArtemisEnabled is REG_DWORD = 0, this is a finding. If the value of ArtemisLevel is REG_DWORD = 0 or REG_DWORD = 1, this is a finding. If the value of ArtemisEnabled is REG_DWORD = 1 and the ArtemisLevel is REG_DWORD = 2, 3 or 4, this is not a finding.

McAfee VirusScan On-Delivery Email Scan Policies must be configured to send a notification email to the IAO, IAM, and/or ePO administrator when a threatened email message is detected.

Finding ID
DTAM158
Rule ID
SV-55265r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM158-McAfee VirusScan Email on-delivery notification email
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Email has become one of the most frequently used methods of spreading malware, through embedded HTML code and attachments. User awareness and training, warning users to not open suspicious emails or email attachments, and not clicking on hyperlinks, etc. from unknown or known senders, will not fully protect from email-borne malware. Mass mailing worms are similar to email-borne viruses, but are self-contained, rather than infecting an existing file. Protecting from email-borne viruses and mass mailing worms by scanning email upon delivery mitigates the risk of infection via email.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Alerts tab, locate the "Email alert for user:" label. Select the "Send alert to mail user:" option. Enter the email recipient information for the notification email to be sent to the IAO/IAM and/or ePO administrator. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Alerts tab, locate the "Email alert for user:" label. Ensure that "Send alert to mail user:" is selected. Verify that the email recipient information is complete for a notification email to be sent to the IAO/IAM and/or ePO administrator. Criteria: If the option "Send alert to mail user:" is selected and the email recipient information is complete for a notification email to be sent to the IAO, IAM, ePO administrator or System Administrator, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\AlertOptions Criteria: If the value bSendMailToUser is 0, this is a finding. If the value for szSendTo is configured to any recipient other than the IAO, IAM, ePO Administrator, or System Administrator, this is a finding.

McAfee VirusScan On-Delivery Email Scan Policies must be configured to log session summary and failure to scan encrypted files.

Finding ID
DTAM159
Rule ID
SV-55266r4_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM159-McAfee VirusScan Email on-delivery log session summary
CCI
CCI-000130
Target Key
(None)
Documentable
No
Discussion

Log management is essential to ensuring that computer security records are stored in sufficient detail for an appropriate period of time. Routine log analysis is beneficial for identifying security incidents, policy violations, fraudulent activity, and operational problems. Logs are also useful when performing auditing and forensic analysis, supporting internal investigations, establishing baselines, and identifying operational trends and long-term problems.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Reports tab, locate the "What to log in addition to scanning activity:" label. Select the "Session summary" and "Failure to scan encrypted files" options. Select Save.

Check Content

Note: If an email client is not running on this system, this check can be marked as Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On Delivery Email Scan Policies. Under the Reports tab, locate the "What to log in addition to scanning activity" label. Ensure the "Session summary", and "Failure to scan encrypted files" options are selected. Criteria: If the "Session summary" and "Failure to scan encrypted files" options are selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Email Scanner\Outlook\OnDelivery\ReportOptions Criteria: If the value dwLogEvent is not x120 (288) or x130 (304), this is a finding. x120 (288) indicates both Session summary and Failure to scan encrypted files are selected. x130 (304) indicates Session summary, Failure to scan encrypted files, and Session settings are all selected.

McAfee VirusScan On-Access General Policies must be configured to not exclude any URL scripts from being scanned unless the URL exclusions have been documented with, and approved by, the ISSO/ISSM/DAA.

Finding ID
DTAM160
Rule ID
SV-55267r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM160-McAfee VirusScan on-access URL exclusions
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Many attackers use toolkits containing several different types of utilities and scripts that can be used to probe and attack hosts. Scripts are a common carrier of malware and none should be excluded from scanning. In the unlikely event that excluding scanning a script impacts the operational function and/or availability of a system, and reasonable mitigation efforts have been put into place, the exclusion may be put into place but must be documented with, and approved by, the ISSO/ISSM/DAA.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the ScriptScan tab, locate the "ScriptScan exclusions" label. Remove any exclusions listed in the URL field.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access General Policies. Under the ScriptScan tab, locate the "ScriptScan exclusions:" label. Ensure there are no exclusions listed in the URL field. Criteria: If there are no exclusions listed in the URL field, this is a not finding. If there are exclusions listed in the URL field, and the exclusions have been documented with, and approved by, the ISSO/ISSM/DAA, this is not a finding. If there are exclusions listed in the URL field, and the exclusions have not been documented with, and approved by, the ISSO/ISSM/DAA, this is a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\Script Scanner Criteria: If the ExcludedURLs REG_MULTI_SZ has any entries, and the excluded URLs have not been documented with, and approved by, the ISSO/ISSM/DAA, this is a finding.

McAfee VirusScan Access Protection Policies must be configured to enable access protection.

Finding ID
DTAM161
Rule ID
SV-55268r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM161-Access Protection enablement
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

Access Protection prevents unwanted changes to a computer by restricting access to specified ports, files and folders, shares, and registry keys and values. It prevents users from stopping McAfee processes and services, which are critical before and during outbreaks. Access Protection for VSE uses predefined and user-defined rules to strengthen systems against virus attacks. For instance, rules are used to specify which items can and cannot be accessed. Each rule can be configured to block and/or report access violations when they occur, and rules can also be disabled.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection settings:" label. Select the "Enable Access Protection" option. Select Save.

Check Content

NOTE: Access Protection must be enabled in order to afford protection identified in DTAM150 and DTAM151. If HIPS signatures are enabled to provide the same protection as DTAM138, DTAM139, DTAM140, DTAM141, DTAM142, DTAM143, DTAM144, DTAM145, DTAM146, DTAM147, DTAM148 and DTAM149, those checks may be individually marked as not applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection settings:" label. Ensure the "Enable Access Protection" option is selected. Criteria: If the "Enable Access Protection" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\BehaviourBlocking Criteria: If the value APEnabled is 1, this is not a finding.

McAfee VirusScan On-Access Default Processes Policies must be configured to detect unwanted programs.

Finding ID
DTAM165
Rule ID
SV-55269r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM165-McAfee VirusScan on-access unwanted programs
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Potentially Unwanted Programs (PUPs) include Spyware, Adware, Remote Administration Tools, Dialers, Password Crackers, Jokes, and Key Loggers. While PUPs do not typically have any infections capability on their own, they rely on malware or other attach mechanisms to be installed onto target hosts, after which they will collect and transfer data from the host to an external host and/or will be used as attach mechanisms. Configuring the antivirus software to attempt to clean the file first will allow for the possibility of a false positive. In most cases, however, the secondary action of delete will be used, mitigating the risk of the PUPs being installed and used maliciously.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Unwanted programs detection:" label. Place a check in the "Detect unwanted programs" checkbox. Select Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Scan Items tab, locate the "Unwanted programs detection:" label. Ensure the "Detect unwanted programs" option is selected. Criteria: If the "Detect unwanted programs" option is selected, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the value ApplyNVP is 1, this is not a finding. If the value is 0, this is a finding.

McAfee VirusScan On-Access Default Processes Policies actions, When an unwanted program is found must be configured to clean files automatically as first action.

Finding ID
DTAM166
Rule ID
SV-55270r1_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM166-McAfee VirusScan on-access unwanted program first action
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Potentially Unwanted Programs (PUPs) include Spyware, Adware, Remote Administration Tools, Dialers, Password Crackers, Jokes, and Key Loggers. While PUPs do not typically have any infections capability on their own, they rely on malware or other attach mechanisms to be installed onto target hosts, after which they will collect and transfer data from the host to an external host and/or will be used as attach mechanisms. Configuring the antivirus software to attempt to clean the file first will allow for the possibility of a false positive. In most cases, however, the secondary action of delete will be used, mitigating the risk of the PUPs being installed and used maliciously.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Actions tab, locate the "When an unwanted program is found:" label. From the "Perform this action first:" pull down menu, select "Clean files automatically". Click OK to Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Actions tab, locate the "When an unwanted program is found:" label. Ensure that for the "Perform this action first:" pull down menu, "Clean files automatically" is selected. Criteria: If "Clean files automatically" is selected from "Perform this action first", this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the uAction_Program does not have a value of 5, this is a finding.

McAfee VirusScan On-Access Default Processes Policies actions, When an unwanted program is found must be configured to delete files automatically if first action fails.

Finding ID
DTAM167
Rule ID
SV-55271r2_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM167-McAfee VirusScan on-access unwanted program second action
CCI
CCI-001242
Target Key
(None)
Documentable
No
Discussion

Potentially Unwanted Programs (PUPs) include Spyware, Adware, Remote Administration Tools, Dialers, Password Crackers, Jokes, and Key Loggers. While PUPs do not typically have any infections capability on their own, they rely on malware or other attach mechanisms to be installed onto target hosts, after which they will collect and transfer data from the host to an external host and/or will be used as attach mechanisms. Configuring the antivirus software to attempt to clean the file first will allow for the possibility of a false positive. In most cases, however, the secondary action of delete will be used, mitigating the risk of the PUPs being installed and used maliciously.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Actions tab, locate the "When an unwanted program is found:" label. From the "If the first action fails, then perform this action:" pull down menu, select "Delete files automatically". Click OK to Save.

Check Content

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select from the Policy column the policy associated with the On-Access Default Processes Policies. Under the Actions tab, locate the "When an unwanted program is found:" label. Ensure the "If the first action fails, then perform this action:" has "Delete files automatically" selected. Criteria: If "Delete files automatically" is selected from the "If the first action fails, then perform this action:" drop-down list, this is not a finding. On the client machine, use the Windows Registry Editor to navigate to the following key: HKLM\Software\McAfee\ (32-bit) HKLM\Software\Wow6432Node\McAfee\ (64-bit) SystemCore\VSCore\On Access Scanner\McShield\Configuration\Default Criteria: If the uSecAction_Program does not have a value of 4, this is a finding.

McAfee VirusScan Access Protection Rules Anti-Spyware Maximum Protection must be set to block and report when common all programs are run from the Temp folder.

Finding ID
DTAM170
Rule ID
SV-73793r3_rule
Severity
Cat II
CCE
(None)
Group Title
DTAM170--Access Protection block execution of all programs from temp folder
CCI
CCI-001243
Target Key
(None)
Documentable
No
Discussion

This rule prevents all program from running files from the Temp directory. This would protect against a large number of trojans and questionable web installation mechanisms that are used by many adware and spyware applications.

Fix Text

From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Spyware Maximum Protection". Select the "Prevent all programs from running files from the Temp folder"(Block and Report) option. Select Save.

Check Content

Note: If the HIPS signatures 7010, 7011, 7020 and 7035 are enabled to provide this same protection, this check is Not Applicable. From the ePO server console System Tree, select the Systems tab, select the asset to be checked, select Actions, select Agent, and select Modify Policies on a Single System. From the product pull down list, select VirusScan Enterprise 8.8.0. Select the policy associated with the Access Protection Policies. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Spyware Maximum Protection". Ensure the "Prevent all programs from running files from the Temp folder" (Block and Report) option is selected. Criteria: If the "Prevent all programs from running files from the Temp folder" (Block and Report) option is selected, this is not a finding. Registry keys are not available for this setting. To validate from client side, access the local VirusScan console by clicking Start->All Programs->McAfee->VirusScan Console. Under the Task column, select Access Protection, right-click, and select Properties. Under the Access Protection tab, locate the "Access protection rules:" label. In the "Categories" box, select "Anti-Spyware Maximum Protection". Ensure the "Prevent all programs from running files from the Temp folder" (Block and Report) option is selected. Criteria: If the "Prevent all programs from running files from the Temp folder" (Block and Report) option is selected, this is not a finding.

Responsibility

System Administrator