Free DISA STIG and SRG Library | Vaulted
Removed

V-100097

The layer 2 switch must be configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs.

Finding ID
SRG-NET-000512-L2S-000100
Rule ID
SV-109201r1_rule
Severity
Cat II
CCE
(None)
Group Title
SRG-NET-000512-L2S-000100
CCI
CCI-000366
Target Key
(None)
Documentable
No
Discussion

Configuring the network device to implement organization-wide security implementation guides and security checklists ensures compliance with federal standards and establishes a common security baseline across DoD that reflects the most restrictive security posture consistent with operational requirements. Configuration settings are the set of parameters that can be changed that affect the security posture and/or functionality of the network device. Security-related parameters are those parameters impacting the security state of the network device, including the parameters required to satisfy other security control requirements.

Fix Text

Configure the switch to be configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs.

Check Content

Determine if the switch is configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs. If it is not configured in accordance with the designated security configuration settings, this is a finding.