Free DISA STIG and SRG Library | Vaulted

V-70507

The storage system must only be operated in conjunction with an Active Directory server in a trusted environment if an LDAP server is not available.

Finding ID
HP3P-32-001507
Rule ID
SV-85129r1_rule
Severity
Cat I
CCE
(None)
Group Title
SRG-OS-000001-GPOS-00001
CCI
CCI-000764
Target Key
(None)
Documentable
No
Discussion

Where strong account and password management capabilities are required, the 3PAR system is heavily dependent on its ability to use an AD server. Satisfies: SRG-OS-000001-GPOS-00001, SRG-OS-000104-GPOS-00051, SRG-OS-000480-GPOS-00227

Fix Text

Use this series of commands to configure the host to use Active Directory: cli% setauthparam -f ldap-server <AD server IP address> cli% setauthparam -f binding simple cli% setauthparam -f ldap-StartTLS require cli% setauthparam -f Kerberos-realm <Kerberos realm, such as WIN2K12FOREST.THISDOMAIN.COM> cli% setauthparam -f ldap-server-hn <fully qualified domain name of AD server, such as adserver.thisdomain.com> cli% setauthparam -f accounts-dn CN=Users,DC=win2k12forest,DC=thisdomain,DC=com cli% setauthparam -f user-dn-base CN=Users,DC=win2k12forest,DC=thisdomain,DC=com cli% setauthparam -f user-attr WIN2K12FOREST\\ cli% setauthparam -f account-obj user cli% setauthparam -f account-name-attr sAMAccountName cli% setauthparam -f memberof-attr memberOf cli% setauthparam -f browse-map "CN=<customer-assigned name of browse role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f edit-map "CN=<customer-assigned name of edit role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f service-map "CN=<customer-assigned name of service role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f super-map "CN=<customer-assigned name of super role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com"

Check Content

Determine if the system is configured for Active Directory (AD). Enter the following command: cli% showauthparam If the result returns an error, this is a finding. If the resulting output does include the parameters "groups-dn", "group-obj", or "group-name-attr" then the host is setup for LDAP, this requirement is not applicable. If the host is setup for Active Directory and these fields in the output are not configured, this is a finding. ldap-server <ip address of AD server> ldap-server-hn <host name of AD server> Next, verify that the AD authentication is operational by entering the following command: cli% checkpassword <username>: password: <Enter the password for username> If the username and password used in checkpassword are known to be valid AD credentials, and the following text is NOT displayed at the end of the resulting output, this is a finding. user <username> is authenticated and authorized Note: The "checkpassword" command will not display authenticated information even if AD is properly configured, if the username and password are not entered correctly.