Free DISA STIG and SRG Library | Vaulted

V-66089

The HP FlexFabric Switch must have the default VLAN pruned from all trunk ports that do not require it.

Finding ID
HFFS-L2-000026
Rule ID
SV-80579r1_rule
Severity
Cat II
CCE
(None)
Group Title
SRG-NET-000512-L2S-000009
CCI
CCI-000366
Target Key
(None)
Documentable
No
Discussion

The default VLAN (i.e., VLAN 1) is a special VLAN used for control plane traffic such as Spanning-Tree Protocol (STP), Dynamic Trunking Protocol (DTP), VLAN Trunking Protocol (VTP), and Port Aggregation Protocol (PAgP). VLAN 1 is enabled on all trunks and ports by default. With larger campus networks, care needs to be taken about the diameter of the STP domain for the default VLAN. Instability in one part of the network could affect the default VLAN, thereby influencing control-plane stability and therefore STP stability for all other VLANs.

Fix Text

Remove the native vlan from trunks that do not require it. [HP-interface GigabitEthernet1/0/1] undo port trunk permit vlan 1

Check Content

Review the HP FlexFabric Switch configuration and verify that the default VLAN is pruned from trunk links that do not require it. If the default VLAN is not pruned from trunk links that should not be transporting frames for the VLAN, this is a finding. &lt;<HP>display vlan 1 VLAN ID: 1 VLAN type: Static Route interface: Configured Description: VLAN 0001 Name: VLAN 0001 Tagged ports: None Untagged ports: GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3 GigabitEthernet1/0/4 GigabitEthernet1/0/5 GigabitEthernet1/0/6 GigabitEthernet1/0/7 GigabitEthernet1/0/8