Free DISA STIG and SRG Library | Vaulted

V-66073

The HP FlexFabric Switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports.

Finding ID
HFFS-L2-000015
Rule ID
SV-80563r1_rule
Severity
Cat II
CCE
(None)
Group Title
SRG-NET-000362-L2S-000026
CCI
CCI-002385
Target Key
(None)
Documentable
No
Discussion

IP Source Guard provides source IP address filtering on a Layer 2 port to prevent a malicious host from impersonating a legitimate host by assuming the legitimate host's IP address. The feature uses dynamic DHCP snooping and static IP source binding to match IP addresses to hosts on untrusted Layer 2 access ports. Initially, all IP traffic on the protected port is blocked except for DHCP packets. After a client receives an IP address from the DHCP server, or after static IP source binding is configured by the administrator, all traffic with that IP source address is permitted from that client. Traffic from other hosts is denied. This filtering limits a host's ability to attack the network by claiming a neighbor host's IP address.

Fix Text

Configure the HP FlexFabric Switch to have IP Source Guard enabled on all user-facing or untrusted access switch ports. [HP-Ten-GigabitEthernet1/0/10] [HP-Ten-GigabitEthernet1/0/10]ip verify source ip-address [ mac-address ] [HP-Ten-GigabitEthernet1/0/10]ip source binding ip-address ip-address [ mac-address mac-address ] [ vlan vlan-id ]

Check Content

Review the HP FlexFabric Switch configuration to verify that IP Source Guard is enabled on all untrusted access switch ports. If the HP FlexFabric Switch does not have IP Source Guard enabled on all user-facing or untrusted access switch ports, this is a finding. [HP]dis ip source binding static Total entries found: 0 IP Address MAC Address Interface VLAN Type