Free DISA STIG and SRG Library | Vaulted

V-66061

The HP FlexFabric Switch must provide the capability for authorized users to remotely view, in real time, all content related to an established user session from a component separate from the HP FlexFabric Switch.

Finding ID
HFFS-L2-000009
Rule ID
SV-80551r1_rule
Severity
Cat II
CCE
(None)
Group Title
SRG-NET-000332-L2S-000002
CCI
CCI-001920
Target Key
(None)
Documentable
No
Discussion

Without the capability to remotely view/hear all content related to a user session, investigations into suspicious user activity would be hampered. Real-time monitoring allows authorized personnel to take action before additional damage is done. The ability to observe user sessions as they are happening allows for interceding in ongoing events that after-the-fact review of captured content would not allow.

Fix Text

Configure the HP FlexFabric Switch to remotely capture ingress and egress packets from any designated switch port for the purpose of monitoring a specific user session as shown in the following example: [HP]mirroring-group 1 remote-source [HP]mirroring-group 1 mirroring-port GigabitEthernet 1/0/1 both [HP]mirroring-group 1 monitor-port GigabitEthernet 1/0/2

Check Content

Verify that the HP FlexFabric Switch is capable of capturing ingress and egress packets from any designated switch port for the purpose of remotely monitoring a specific user session. If the HP FlexFabric Switch is not capable of capturing ingress and egress packets from a designated switch port for the purpose of remotely monitoring a specific user session, this is a finding.