Free DISA STIG and SRG Library | Vaulted

V-60225

The BIG-IP appliance must be configured to use automated mechanisms to alert security personnel to threats identified by authoritative sources (e.g., CTOs) and IAW with CJCSM 6510.01B.

Finding ID
F5BI-DM-000263
Rule ID
SV-74655r1_rule
Severity
Cat II
CCE
(None)
Group Title
SRG-APP-000516-NDM-000333
CCI
CCI-001274
Target Key
(None)
Documentable
No
Discussion

By immediately displaying an alarm message, potential security violations can be identified more quickly even when administrators are not logged onto the network device. An example of a mechanism to facilitate this would be through the utilization of SNMP traps.

Fix Text

Configure the BIG-IP appliance to use automated mechanisms to alert security personnel to threats identified by authoritative sources (e.g., CTOs) and IAW with CJCSM 6510.01B.

Check Content

Verify the BIG-IP appliance is configured to use automated mechanisms to alert security personnel to threats identified by authoritative sources (e.g., CTOs) and IAW with CJCSM 6510.01B. Navigate to the BIG-IP System manager >> System >> Logs >> Configuration >> Log Destinations. Verify a log destination is configured for a CNDSP or other mechanism that is monitored by security personnel. If the BIG-IP appliance is not configured to use automated mechanisms to alert security personnel to threats identified by authoritative sources (e.g., CTOs) and IAW with CJCSM 6510.01B, this is a finding.