Free DISA STIG and SRG Library | Vaulted

V-60221

The BIG-IP appliance must be configured in accordance with the security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs.

Finding ID
F5BI-DM-000259
Rule ID
SV-74651r1_rule
Severity
Cat II
CCE
(None)
Group Title
SRG-APP-000516-NDM-000317
CCI
CCI-000366
Target Key
(None)
Documentable
No
Discussion

Configuring the network device to implement organization-wide security implementation guides and security checklists ensures compliance with federal standards and establishes a common security baseline across DoD that reflects the most restrictive security posture consistent with operational requirements. Configuration settings are the set of parameters that can be changed that affect the security posture and/or functionality of the network device. Security-related parameters are those parameters impacting the security state of the network device, including the parameters required to satisfy other security control requirements.

Fix Text

Configure the BIG-IP appliance to be in compliance with the applicable security configuration settings based on DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs.

Check Content

Verify the BIG-IP appliance is configured in accordance with the security configuration settings based on applicable DoD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs. If the BIG-IP appliance is not configured in accordance with the designated security configuration settings, this is a finding.