Free DISA STIG and SRG Library | Vaulted

V-220506

The Cisco switch must be configured to generate log records when administrator privileges are modified.

Finding ID
CISC-ND-001240
Rule ID
SV-220506r604141_rule
Severity
Cat II
CCE
(None)
Group Title
SRG-APP-000495-NDM-000318
CCI
CCI-000172
Target Key
(None)
Documentable
No
Discussion

Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter).

Fix Text

Configure the Cisco switch to generate log records when account privileges are modified as shown in the example below: Step 1: Configure the AAA servers as shown in the example below: SW1(config)# radius-server host 10.1.48.10 SW1(config)# radius-server host 10.1.48.12 Step 2: Configure an AAA server group as shown in the example below: SW1(config)# aaa group server radius RADIUS_SERVERS SW1(config-radius)# server 10.1.48.10 SW1(config-radius)# server 10.1.48.12 SW1(config-radius)# exit Step 3: Enable AAA accounting as shown in the example below: SW1(config)# aaa accounting default group RADIUS_SERVERS SW1(config)# end

Check Content

Step 1: Verify that account records will be sent to an AAA server as shown in the example below: aaa accounting default group RADIUS_SERVERS Step 2: Verify that the referenced group name has defined AAA servers that are online. aaa group server radius RADIUS_SERVERS server 10.1.48.10 server 10.1.48.12 Note: Cisco NX-OS devices report configuration activity to TACACS+ or RADIUS servers in the form of accounting records. Each accounting record contains accounting attribute-value (AV) pairs and is stored on the AAA server. If the Cisco switch is not configured to generate log records when administrator privileges are modified, this is a finding.