Free DISA STIG and SRG Library | Vaulted

V-101117

The Cisco switch must manage excess bandwidth to limit the effects of packet-flooding types of denial-of-service (DoS) attacks.

Finding ID
CISC-L2-000040
Rule ID
SV-110221r1_rule
Severity
Cat II
CCE
(None)
Group Title
SRG-NET-000193-L2S-000020
CCI
CCI-001095
Target Key
(None)
Documentable
No
Discussion

Denial of service is a condition when a resource is not available for legitimate users. Packet-flooding DDoS attacks are referred to as volumetric attacks and have the objective of overloading a network or circuit to deny or seriously degrade performance, which denies access to the services that normally traverse the network or circuit. Volumetric attacks have become relatively easy to launch by using readily available tools such as Low Orbit Ion Cannon or botnets. Measures to mitigate the effects of a successful volumetric attack must be taken to ensure that sufficient capacity is available for mission-critical traffic. Managing capacity may include, for example, establishing selected network usage priorities or quotas and enforcing them using rate limiting, Quality of Service (QoS), or other resource reservation control methods. These measures may also mitigate the effects of sudden decreases in network capacity that are the result of accidental or intentional physical damage to telecommunications facilities (such as cable cuts or weather-related outages).

Fix Text

Enable QoS on the switch: SW1(config)#mls qos

Check Content

Review the switch configuration to verify QoS has been enabled as shown below: mls qos If QoS has not been enabled, this is a finding.